Sharp DK-CL5P operation manual Setting the time and date

Setting the time and date

DK-CL5P

MUSIC SYSTEM FOR iPod & iPhone

TUNING

CLOCK / MEMORY

In this example, the clock is set for the 12-H (12 hour) display.

1In standby mode, press the CLOCK/MEMORY button for more than 2 seconds. The clock time display format will blinking. Press the ( or ) button to select

12-H or 24-H for clock time display format, then press CLOCK/MEMORY to confirm.

2Press the or button to adjust the hour and then press the CLOCK/MEMORY button.

PM

Press the ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously.

“AM” or “PM” indicator will interchange after each 12 hour cyclic.

3Press the or button to adjust the minutes and then press the CLOCK/MEMORY button.

PM

Press the ( or ) button once to advance the time by 1 minute. Hold it down for about 5 seconds to change the time in 5-minutes interval.

4Press the or button to adjust the day and then press the CLOCK/MEMORY button.

PM

SUN

“:” will be blinking to indicate time and date setting is completed.

Note:

During battery operations in standby mode, press the SNOOZE/ DIMMER button to display the clock for about 5 seconds.

Basic Operation

15