Sharp Alarm and sleep operation, DK-CL5PListening to the radio, To recall a programmed station

DK-CL5PListening to the radio (continued)

Note:

The batteries system protects the programmed stations should there be a power failure or the AC/DC adaptor becomes disconnected. If the backup batteries are drain off, the programmed stations will be erased.

■To recall a programmed station

	Press PRESET/TRACK (	or	) button on main unit
FeaturesRadio/Advanced	repeatedly or PRESET/FOLDER (s or r) on remote control
	repeadtedly to select the desired programmed station.

22

Alarm and sleep operation

■Alarm

The unit turns on and play desired source (iPod, iPhone or TUNER) or Buzzer sound for 1 hour alarm cycle.

Before setting the alarm:

1Check that the clock is set to the correct time. (refer page 15) If it is not set, you cannot use the alarm function.

2For iPod or iPhone playback: Insert iPod or iPhone to the unit. (refer page 17)

3For TUNER: Set preset memory. (refer page 21)

Setting the alarms

In this example, the setting is for ALARM 1. The same method is used to set for ALARM 2.

1In standby mode, press and hold the ALARM 1 button until the alarm time blinking.

2Press the ( or ) button to adjust the hour and press the ALARM 1 button.

PM

Press the ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. “AM” or “PM” indicator will interchange after each 12 hour cyclic.