Sharp DK-CL5P Troubleshooting chart, Advanced Features/References, Enhancing your system

DK-CL5P

Advanced Features/References

Enhancing your system (continued)

■Listening to the audio/video sounds from portable audio player, computer etc.

1Use the auxiliary cable to connect the portable audio player, computer etc. to the AUDIO IN jack.

When using video equipment, connect the audio output to this unit and the video output to a television.

2Press the ON/STAND-BY button to turn the power on.

3Press the FUNCTION button on main unit or remote control to select Audio In function.

4Play the connected equipment.

Note:

To prevent noise interference, place the unit away from the television and do not make any auxiliary playback, while listening to the iPod or iPhone.

Troubleshooting chart

Many potential problems can be resolved by the owner without calling a service technician.

If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center.

■ General

Symptom	Possible cause
● The clock is not set to the	● Did a power failure occur?
correct time.	Reset the clock. (Refer to
	page 15)
● When a button is	● Set the unit to the power
pressed, the unit does	stand-by mode and then turn
not respond.	it back on.
	● If the unit still malfunctions,
	reset it.
	(Refer to page 28)
● No sound is heard.	● Is the volume level set to “0”?

■Remote control

Symptom Possible cause

●The remote control does ● Is the AC/DC adaptor of the

not operate.	unit plugged in?
	● Is the battery polarity
	correct?
	● Is the battery dead?
	● Is the distance or angle
	incorrect?
	● Does the remote control
	sensor receive strong light?

26