Sharp DK-CL5P Enhancing your system, To confirm the remaining nap time, Auxiliary cable

■NAP

The main unit will temporarily enters stand-by mode when pressing NAP button. After nap time, main unit will power on into last function used.

1Playback the desired sound source.

2Press the NAP button on the remote control repeatedly to select nap time.

Note:

Selecting “oFF” during NAP setting will activate the last function.

120 90 60 30

oFF 05 10 20

3The unit will go to standby mode and NAP indicator () appears on the display.

To confirm the remaining nap time:

1 While “” is indicated, press the NAP button once to display

“XXX”.

“XXX” is NAP remaining time.

●The remaining NAP time is displayed for about 3 seconds.

●You can change the remaining NAP time while it is displayed by pressing the NAP button (step 2).

To cancel the NAP operation:

Press the ON/STAND-BY button while “” is indicated.

Enhancing your system

The auxiliary cable is not included. Purchase a separate auxiliary cable as shown below.

Portable audio player

Computer

To the line output jack

FM ANTENNA VIDEO OUT AUDIO IN DC IN 8V

Auxiliary cable

(not supplied)

DK-CL5P

Advanced Features

25