Sharp DV-L70BL, DV-L70S operation manual 69 GB, Example To input , press 2

Programmed Playback

3 Use the number buttons to input the chapter number you want, and then press M (MEMORY).

Example: To input Chapter 23, press 2, 3
	C H A P T E R P R O G R A M
and then M (MEMORY).
	T = T I T L E : 1				0	C = C H A P T E R
	C 0 2 3	C	–	–	–	C – – –	C – – –
	C – – –	C – – –				C – – –	C – – –

•Repeat step 3 for up to 20 chapters in the sequence that you want them to play.

4 Press û PLAY to start play in the
	PROGRAM	T 1 0 C 0 2 3
sequence you specified.
		1 : 0 5 : 4 6

To stop programmed play

1 Press Ë STOP.

Helpful Hints

•The number you input is not stored in memory if there is no corresponding title number on the disc. Make sure you input title numbers correctly.

•If you input the wrong number, press C (CLEAR) and then re-input.

•Holding down C (CLEAR) for about two seconds clears all the program data in memory.

•To exit the programming procedure part way through, press RETURN.

•You can also input one-digit numbers in steps 2 and 3. To input 2, for example, press 2 and then M (MEMORY).

69 GB