Sharp DV-L70S, DV-L70BL Using Dolby Virtual DVD only, To turn Dolby Virtual on and off

Using Dolby Virtual (DVD only)

•Your DVD player has built-in virtual surround circuitry that provides rich audio output when playing through a stereo (2-channel) television or through audio equipment.

•Dolby Virtual lets you play audio from DVDs recorded using Dolby Digital (5.1 channel) and Dolby Surround (Pro Logic).

•See the disc jacket for information about how its audio was recorded.

Dolby Virtual

The following table shows the types of audio recordings for which Dolby Virtual is enabled.

Dolby Digital	Dolby Surround	Linear PCM Audio/	MPEG Audio
(5.1 channel)	(Pro Logic)	DTS Audio	Ver.2.0
Yes	Yes	No	No

•Dolby Virtual is disabled when the DVD player is connected to external equipment over an optical digital connection.

BACKLIGHT VIEW VIDEO

OPERATE HI/LOW/OFF MODE ADJUST

VIRTUAL		DIGITAL	DIGITAL
		GAMMA	S.PICTURE
TITLE			ENTER
MENU			RETURN
SKIP	PLAY		SKIP
RESUME	STOP		STILL/PAUSE
DISPLAY	REV	FWD	SLOW
			REPEAT

PROGRAM

VIRTUAL

			I
			DNPUT/
			VD	BAC	KLIGHT
				HI/LO
			SKIP	W/OFF		VI
						MO	EW
			PL	AY/GUI			DE
					SKIP
	TITLE		STOP	STILL/PAUSE
OPEN	ENT	ER	MENU
		RE
			TURN

ON/STANDBY

GUI

CLEAR MEMORY DIRECT

See page 79 for information about how to make this setting using the DVD player’s GUI.

To turn Dolby Virtual on and off

1 While the DVD is playing, press VIRTUAL.

• Each press of VIRTUAL toggles Dolby VIRTUAL O N Virtual on and off.

•Dolby Virtual cannot be used with a video CD or audio CD.

•Dolby Virtual is disabled during playback of a DVD recorded with DTS audio, linear PCM audio and Audio MPEG Version 2.0.

•The QSound mark used by Dolby Virtual is a trademark of QSound Labs, Inc.

GB 76