Listening to Bluetooth enabled devices

■■ About Bluetooth technology

Bluetooth wireless technology is a short-range radio technol- ogy that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 meters (30 feet) without the hassle of having to use cables to connect these devices. Since the Bluetooth technology does not require line of sight between the communicating devices, it is not necessary to line up the transmitting device and the receiver, as in the case of infra red technology.

Communication System and Bluetooth Profile of this unit

There are many available Bluetooth Profiles describing the basic communication methods, specific functions and uses, to enable communication between devices.

This unit supports the following:

Communication System: Bluetooth Specification version

2.1Bluetooth + Enhanced Data Rate (EDR) Profile : A2DP (Advanced Audio Distribution Profile)

A2DP enables audio streaming from an A2DP equipped Bluetooth stereo audio source device (eg mobile phone) to this unit. By converting wireless stereo audio signal to analogue audio signal, you can enjoy listening to the sound through this speaker system.

AVRCP (Audio/Video Remote Control Profile) is a technology that allows a single remote control to control all Bluetooth en- abled Audio Video equipment to which a user has access.

Notes when using unit with a mobile phone

●● This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone.

●● Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone while transmitting the sound using a Bluetooth connection.

Audio stream

Bluetooth mobile phone or other

Bluetooth Stereo audio source device

■■ Pairing Bluetooth devices

Bluetooth devices need to be initially paired first before they can exchange data. Once paired, it is not necessary to pair them again unless:

●● pairing is made with more than 8 devices.

Pairing can only be made one device at a time. This unit can be paired to a maximum of 8 devices. If subse- quent device is paired, the oldest device paired, will be deleted and replaced with the new one.

●● this unit is reset. All pairing information is deleted when unit is reset.

●● pairing information is deleted while re-pairing, etc.

On indicators

Status	PAIRING indicator (blue)
Unconnected	Blinks
Pairing mode	Blinks quickly
Connected	Lights up

E-8