Listening to the iPod, iPhone or iPad (continued)
■■ iPhone playback
●● Sound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds.
●● Incoming calls will pause the playback.
●● Once the calls are answered, the conversation can only be heard through the
■■ iPod and iPhone connection (Dock only)
Caution:
Unplug all accessories from the iPod or iPhone before inserting it into the dock.
Note:
Docking station is for iPod touch (5th generation), iPod nano (7th generation) and iPhone 5 connection only. Other Apple products (iPod, iPhone and iPad) can be connected via USB terminal.
1Open the docking station for iPod and iPhone by pulling up the cover.
2Dock your iPod or iPhone into the unit.
iPhone (bottom)
iPhone
Lightning connector
Dock for iPhone
■■ iPod or iPhone playback
1Press the
2Press the iPod button on the remote control or FUNCTION button repeatedly on the main unit to select iPod function.
3Insert iPod or iPhone unit into the dock of main unit. “Dock Ok” will appear.
4Press the 
/
(iPod 
/
) button to start playback.
■■ Navigating the iPod, iPhone or iPad menus
1Press the MENU button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu.
2Use the PRESET (
or 
) button to select an item on the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOLUME (+ or
iPod, iPhone and iPad operations:
The operations described below depend on the generation of iPod, iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to