Sharp DK-CL8PH(BK) Listening to the radio, Radio, Tuning, Programming a station, Auto tuning

DK-CL8PH

ENGLISH

Listening to the radio

Radio

ON/STAND-BY	TUNING
ALARM
RESET

■Tuning

1Press the ON/STAND-BY button to turn the power on.

2Press the FUNC. button repeatedly to select the Tuner function.

3Tune to the desired station. Manual tuning:

Press the TUNING ( or ) button to tune into the desired station.

Auto tuning:

When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.

Notes:

●When radio interference occurs, auto scan tuning may stop automatically at that point.

●Auto tuning will skip weak signal stations.

●To stop the auto tuning, press the TUNING ( or ) button again.

■Programming a station

You can store 40 FM stations in memory.

1Perform steps 1 - 3 “Tuning” on page 11.

2Press the CLOCK/MEM. button for more than 2 seconds to enter the preset tuning saving mode.

MON

3 Within 30 seconds, press the or button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4Within 30 seconds, press the CLOCK/MEM. button to store that station in memory.

MON MON

If the preset number indicators disappear before the station is programmed, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a preset station.

When a new station is stored in memory, the station previously programmed for that preset channel number will be erased.

E-11