Wired Profile:
Select whether you wish to use DHCP (recommended) to automatically determine your network information from your router or whether you want to enter the settings manually.
If you selected ‘Enter the Settings (Static Address)’ then the next setup page will ask your for network information. Please fill it out and navigate and click the ‘Continue’ button. If you selected ‘Connect Automatically (DHCP)’, then the above steps are not required.
After the device attempts to connect via DHCP or via the static address information you will be prompted that it successful connected to the network.
You should now be able to use the device on the network. You can verify your connection information by checking the ‘Current Network Status’.
30