Buffalo Technology P4LWAG manual

4 - Plug the Buffalo AC adapter into an AC power outlet. Buffalo recommends connecting the AC adapter to a power-strip with a surge protector to protect it from power surges caused by lightning.

5 - Plug the power connector from the AC adapter into the back of the LinkTheater.

The ‘POWER/STANDBY’ light on the front of the LinkTheater will turn orange, then green. You do not need to press the power button on the front of the LinkTheater. If it does not light up, then please check that the proper AC adapter is plugged in and seated correctly. Also, check that your power- strip or surge protector is on.

6 - Once the ‘POWER/STANDY’ light on the front of the LinkTheater turns green, the device has properly powered up and is ready for use. At this point, please turn on your TV or monitor. Change your TV or monitor’s source setting to correspond to the input that you plugged the LinkTheater into. Once the LinkTheater’s blue menu appears, your LinkTheater’s video is properly connected.