Buffalo Technology P4LWAG manual Hookup

Hookup:

The LinkTheater must be connected to a TV or monitor. Although the LinkTheater plays mp3s and other popular music formats, a TV or monitor is required to navigate and configure options on the LinkTheater.

By default, the LinkTheater uses the standard 4:3 video mode over the yellow analog video connector, or an S-Video connector. Component video is supported for higher resolutions (480p and 720p); however, to initially access the configuration menu, the LinkTheater must be hooked up with the standard yellow analog video connector. For more information on component video, please see the component video section of this user’s manual.

Please follow the procedure below:

1 - Hook up the included analog video cable to your TV or monitor:

2 - Connect the other end of the analog video cable to the associated ports on the LinkTheater:

3 - (OPTIONAL): If you are connecting the LinkTheater to a wired network, then plug in a CAT- 5 Ethernet cable into the Ethernet port on the LinkTheater and connect the other end to your network.