Installing the USB driver
Installing in Windows ME/Windows 2000/Windows XP
1.Turn on the power of the BenQ Joybee 180 MP3 Player by pressing the power button and then connect it to the USB port of your computer using the USB cable pro- vided.
2.A New Hardware Found message appears on the PC screen and installation of the driver is completed auto- matically.
Installing in Windows 98SE
Use the Install Joybee 180 Software option described in the previous section to install the driver if you have Windows 98SE running on your PC. You can also install the USB driver following the steps below:
1.Connect Joybee 180 to the USB port of your computer using the USB cable provided.
2.The Adding New Hardware Wizard appears to install the driver. Follow the instructions on the screen to complete installation. Browse to select the files required for installation under the Joybee 180 directory in the BENQ folder on the disk drive where you installed the Joybee 180 Software.
3.Follow the instructions of the wizard to complete the installation process.
4.A Removable Disk icon appears in the My Computer window on your PC after installation is completed suc- cessfully.
21