Installing the rechargeable battery | Removing the rechargeable battery |
1.Plug the rechargeable battery connections into the connection opening on the rear panel of the device.
2.Slide the rechargeable battery slightly sideways in the direction indicated on the battery until it audibly locks into place.
Charging the battery with the power supply unit
1.Plug the device plug of the power supply unit or the 12V vehicle adapter into the socket on the side of the device.
2.Plug the power plug of the power supply unit into the power socket or the 12V vehicle adap-
ter into the Vehicles cigarette lighter socket.
•While the battery is charging the operation light on the side of the battery is illuminated red.
•When the battery is fully charged the operation light on the side of the battery turns green.
1.Slide the locking tab on the side of the recharge- able battery in the direction of the arrow and hold in this position.
2.Pull the rechargeable battery in the opposite direction to the arrow and then pull backwards.
6.3 Connection to another device
The DVD player can be connected to televisions which operate with the PAL or NTSC standards. In this way you can transmit the display onto the tele- vision screen. If you want to use the DVD player on a television operating under the NTSC standard you may have to select the NTSC television stan- dard in the video settings of the DVD players so cal- led "OSD Menu" (see chapter 8.4. "Special set- tings: TV TYPE")
Video connection to the television
1.Switch off the DVD player and the television.
2.Insert the yellow jack plug of the video cinch cable in the VIDEO IN/OUT socket of the DVD player.
- 9 -