5. Starting Up the Device | 5.3 Preparing the remote control | |
5.1 Unpacking | Inserting the battery | |
For first time activation you only need to pull out | ||
1. | Remove the DVD player and its accessories from | the protective foil that protudes from the battery |
| the packaging | compartment in order to prepare the remote |
2. | Remove all adhesive tapes, foils and transport | control for operation. |
| restraints. | For future battery changes proceed as follows: |
Attention!
Do not permit small children to play with plastic pak- kaging. There is a risk of suffocation!
5.2 Check the delivered contents
Before puting the appliance into use, check that all items are present and free of visible damage.
•DVD player
•Infrared remote control
•1 Remote control battery,
3 V, Type CR2025 (Button cell)
•Audio Cinch cable with 3 Cinch plugs
•Video Cinch cable with Cinch plug and socket
•Vehicle adapter cable
•Power supply unit plug
•1 Rechargeable battery pack
•Headphones
•Carrying case and fastening strap
•This operating manual
1.Pull the battery compartment out of the remote control.
2.Remove the depleted battery and insert a new battery of the type CR2025 (Button cell) into the battery compartment. Make sure that the battery is inserted in accordance with its correct polarity.
3.Push the battery compartment back into the remote control.
Using the remote control
•Point the remote control to the Infrared sensor on the front panel of the device.
•You can use the remote control for distances of up to approx. 8 m from the device.
- 7 -