Playback of an external devices audio and video signals with the DVD player
You can playback images and sound from an external device via the DVD player.
1.For sound transmissions insert the red jack plug of the audio cinch cable into the AUDIO IN/OUT COAX socket of the DVD player.
2.Insert the white and red cinch plugs of the audio cinch cable into the corresponding audio output of the external device.
3.Insert the yellow jack plug of the video cinch cable in the VIDEO IN/OUT socket of the DVD player.
4.Connect the cinch socket of the video cinch cable with the corresponding video output of the external device.
5.Switch on the DVD player and the external device.
6.In order to playback the external devices audio and video signals press the AV button on the re- mote control.
7.In order to switch back to the DVD's display, press the button DVD/USB/CARD.
Note:
Depending on the data carrier the display can remain black for a few seconds until the DVD play- ers image is again displayed.
Note:
The sound of an external device connected to the DVD players audio input will also playback if the device is set to an operating mode other than AV.
6.4 Headphone connection
Attention!
Only use the supplied earphones, type HX206-001.
You can connect headphones with a 3.5 mm stereo jack plug to the DVD player. The headphone con- nection is located on the side of the device. When you connect the headphones the loudspeaker will be switched off and you will only hear sound from the headphones.
•Insert the jack plug of the headphones into the headphone connection.
Important!
Listening to music over long periods with full volume on headphones can lead to hearing damage
- 11 -