Sangean Electronics DT-300/DT-300V manual Short Term Alarm Set

Page 8

LCD will return to real time and Standby Set icon F will appear in display . A buzzer will sound when set time is reached and will continue for at least 3 mimutes or until it is stopped by pressing the Power On/Off Button.

Short Term Alarm Set

This receiver is equipped with a short term 1-180minute timer.To set timer Press the Alarm Set Button 9 for more than 2 seconds until LCD alarm

set icons B appears time digit flashes.During flashing press Time Adjust Button 13 14 to adjust to desired time . Press Alarm Set Button 9 again to finalize setting . A buzzer will sound when set time is reached and will continue for at least 3 minutes or until it is stopped by pressing the Power On /Off Button.

Image 8

Contents Page Page Location Of Controls Location of ControlsPage Display Icons Battery Installation Setting Time Long Term Alarm SetShort Term Alarm Set Speaker On/Off Switch Antenna/Earphone UseVolume Control Tuning the Radio Band Frequency AntennaScan Tuning Manual TuningSetting Presets Manually Selecting Memory Presets Automatic Memory Preset System APSMemory Scan Play Deleting Memory Positions Weather Band WX Reception-DT-300VW onlyLock Switch Mono/Stereo ButtonSpecification Output PowerWeight 3.33 OZ Earphone jack