until the desired station is reached or pressing and holding the Tuning Control 13 or 14 until the station is reached.
C. Setting Presets Manually
Turn on receiver by pressing On/Off Button 5 .Select desired band by pressing Band Selector Button 8 .Tune to the desired station using the Manual or Scan Tuning Method as described above. When the desired station is reached press Memory Button 11 . "Memo" flashes in the LCD display and a suggested preset position flashes. Press Memory Button 11 again if flashing position is suitable and desired station will appear in the position selected. If you would prefer to locate desired station in a position other than that suggested use Memory Selection Button 13 or 14 to move to chosen postion.After selection is complete press Memory Button again to complete Selection.You may store a total of 9 stations for each band Original stations are eliminated or exchanged when a new
12