36AXIS 241QA/AXIS 241SA - Pan Tilt Zoom

Preset positions

Also available with many PTZ devices are Preset positions. These presets are selected from the drop-down Source list on the Live View page and will move and/or zoom the camera to a pre-defined position, that is to cover an area of particular interest. Events can also be configured to go to preset positions when triggered. For information on setting up preset positions, please see Preset positions, on page 33 and the online help.

Guard tour

A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined order or at random, and for configurable time periods. Unlike the Sequence Mode, which is a viewing application under Live View Config (see Live View Config, on page 27), the guard tour sequence runs after the user has logged off or closed the browser.

Advanced

Device - The Device Settings window is for driver specific settings. The appearance of this window can vary depending on the driver installed. Options that can be configured include: Driver Specific Settings for Video Source 1, Mechanical Limits for Moving Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings for Video Source 1.

Controls - The Control settings window contains tools for creating and saving short command buttons that are located under the Control panel. These buttons provide direct access to various built-in auxiliary commands provided by the PTZ driver and are displayed in the PTZ Panel.

Page 36
Image 36
Axis Communications AXIS 241SA user manual Preset positions, Guard tour, Advanced