23
AXIS 241QA/AXIS 241SA - Audio
Audio
The AXIS 241QA/AXIS 241SA can transmit audio to other clients using an external
microphone and can play audio received from other clients by attaching a speaker. The
Audio Settings allow different audio configurations to be set up, such as full duplex, half
duplex, and simplex.
Note: The speaker attached to the audio output of the AXIS 241QA/AXIS 241SA must have a built-in amplifier,
which is the case for e.g. some PC speakers.
Audio Settings
This section describes how to configure the basic audio settings for the AXIS 241QA/AXIS
241SA, such as setting the communication mode and adjusting the sound levels in the
microphone and speaker connected to the camera.
Enable Audio
Select the video sources that the AXIS 241QA/AXIS 241SA will transmit and receive audio
from.
Audio Channels
There are two mono audio channels between the AXIS 241QA/AXIS 241SA and a
connected client, one for receiving audio and the other for transmitting audio. Each audio
channel can be turned on or off, which means there are four audio mode options that can
be used.