OPERATION
Recording A Message
You can record a message up to 10 sec- onds long. Follow these steps to record the message.
Use a straightened paper clip to press in and hold down REC. The red indicator lights. Speak into MIC from about 10 inches away in a normal voice. (Speaking too closely to MIC distorts your recording.)
After 10 seconds, the recording stops auto- matically and the indicator turns off. To stop recording sooner, release REC.
To record a new message, simply repeat these steps. The new message replaces the old one.
Playing the Message
To listen to the message, press PLAY.
Setting the Time
The clock uses the
Follow these steps to set the time.
1.Slide TIME/LOCK/ALM to TIME.
2.Repeatedly press (or hold down) HOUR to set the current hour.
3.Repeatedly press (or hold down) MIN to set the current minute.
4.Slide TIME/LOCK/ALM to LOCK.
Using the Alarm
Follow these steps to set the alarm.
1.Slide TIME/LOCK/ALM to ALM. The currently set alarm time, and AL appear.
2.Repeatedly press HOUR then MIN until the desired alarm time appears.
3.To have the alarm play your recorded message, slide OFF/MSG/CHIME to MSG. To have the alarm sound a series of beeps, slide OFF/MSG/ CHIME to CHIME.
4.Slide TIME/LOCK/ALM to LOCK to store your selections. To show that the alarm is turned on, 
appears.
To check the alarm setting at any time, press HOUR or MIN when TIME/LOCK/ ALM is set to LOCK.
Depending upon the alarm you selected, at the set time, the clock repeatedly announc- es the message or beeps for 1 minute, then turns off. To silence the alarm sooner, press
ALM STOP.
To turn off the alarm so it does not sound again the next day, slide OFF/MSG/CHIME to OFF. 
disappears.
2