Onkyo Connecting the MB-S1, Connecting to an amplifier, Connecting the power cord

Page 13

Connecting the MB-S1

Connecting to other components

Here is detailed explanation of how to connect the main components to the MB-S1. When connecting, refer to the diagram on page 14.

1. Connecting to an amplifier

Connect the analog terminals on the MB-S1 to the CD, TAPE, or MD terminal on the amplifier.

Notice:

When you connect the MB-S1 to the Onkyo TX-L5, use the HD terminal on the rear panel of the TX-L5

2.Connecting an external CD or DVD player

When connecting a CD player, DVD player, CS tuner, or DAT deck equipped with digital output terminals (OPTICAL/COAXIAL), you can record the input source digitally using the MB-S1.

Connect the digital output terminals on a CD player, DVD player or others to the DIGITAL INPUT (OPTICAL/COAXIAL) terminals using audio digital cables. Use the optical digital cable for OPTICAL terminal and the coaxial digital cable for COAXIAL terminal.

When connecting devices, be sure to use the optical digital cable commercially available.

3.Connecting a digital audio recorder such as MD recorder or CD recorder

When connecting a CD recorder, MD recorder or DAT deck equipped with digital input terminals (OPTICAL), you can perform digital recording on the external digital audio recorder.

Connect the DIGITAL OUTPUT terminal (OPTCAL) on the MB- S1 to the digital audio recorder such as CD recorder or MD recorder. Use an optical digital audio cable.

When connecting devices, be sure to use an optical digital cable commercially available.

Notes

•When you copy the audio source digitally, certain restrictions will be applied. (page 14)

•Do not bundle the audio cables together with power cords or speaker cables. Doing so may cause deterioration of the audio signal.

•When you place the MB-S1 near a TV, the picture on the TV may become poor and the output sound from the MB-S1 may be distorted. In this case, place the unit away from the TV.

•When you connect the digital audio output on a DVD player to the DIGITAL INPUT terminals on the MB-S1, set the output type to PCM on the DVD player.

However, the PCM output setting is not available on some DVD players. In this case, the audio signal will not be output even if the DVD player and the MB-S1 are connected.

4.Connecting an analog audio device such as AM/FM tuner or cassette tape deck

When connecting the audio output from an analog audio device such as AM/FM tuner, cassette tape deck, or video deck to the MB- S1, you can record the audio signal onto the HDD.

Connect the analog output terminals on the analog audio device to the ANALOG INPUT terminal on the MB-S1.

Notes:

•Insert the plugs and connectors securely. Remember that improper connection can result in noise, or malfunctions.

•Do not bundle the audio cables together with power cords or speaker cables. Doing so may cause deterioration of the audio signal.

•When you place the MB-S1 near a TV, the picture on the TV may become poor and the output sound from the MB-S1 may be distorted. In this case, place the unit away from the TV.

5. Connecting the power cord

Plug the power cord into a wall outlet.

White line

Wall outlet

Longer slit

Note:

For better sound quality

The power cable of the MB-S1 has polarity.

Insert the plug matching the side with white line to the longer slit on the wall outlet.

After connecting the power cable, the MB-S1 enters the standby state.

STANDBY/ON

 

 

 

 

 

 

 

PLAY MODE

EDIT/CLEAR

 

 

ON

 

 

 

 

 

 

 

 

MULTI JOG

STOP

PLAY/

PAUSE

 

 

 

 

 

 

 

 

YES

 

NO

 

 

STANDBY

 

 

 

 

 

 

 

MENU/EXIT

 

PLAY LIST

 

 

 

 

 

 

 

 

 

 

PUSH TO ENTER

 

 

 

USB

DISPLAY

TEXT

CD DUBBING

FAVORITE IT

HDD REC

REC MODE

EXTERNAL INPUT

OPERATION

 

 

 

 

 

 

 

 

 

 

 

C D

 

HDD

 

 

 

 

 

 

 

 

 

 

 

 

HARD DISK MUSIC LIBRARY MB-S1

“STANDBY”

The date indication

indication lights.

blinks.

6.Connecting the Onkyo products equipped with terminals

With Onkyo components that are equipped with a terminal, use

the supplied RI cable to connect the terminal to the terminal of the MB-S1.

The terminals are only effective if they are used in conjunction

with an Onkyo amplifier with a connector. Do not connect to a

component other than an Onkyo component with a connector. Doing so may damage the BB-S1.

The functions of the left and right terminals are the same. Connect to either one.

Connecting the cable only does not make the system operational. You must also connect the audio cables as well.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents MB-S1 Avis Important SafeguardsPrecautions For Canadian model PrecautionsModele pour les Canadien For British modelContents MP3 Main FeaturesBitrate ID3 tagBefore using this unit Supplied accessoriesInstalling the remote controller batteries Using the remote controllerFront panel Parts names and functionsFront panel display Parts names and functionsRemote controller Rear panel Connecting the MB-S1 Connecting to an amplifier Connecting the MB-S1Connecting an external CD or DVD player Connecting the power cordHandling discs CleaningCondensation Scms Guide to the serial copy management system Rules for recording digital inputSdmi Secure Digital Music Initiative WM Understanding playing features for CD player section Understanding the basic operations before using the MB-S1Understanding playing features for the internal HDD section Managing the music information on the MB-S1Understanding the play list Understanding the basic operations before using the MB-S1Switching the CD player and HDD Turning on the powerOpening the CD tray Setting date and time Set a disc Listening to an audio CD or CD-ROMActivate the CD player section Start playingListening to an audio CD or CD-ROM Using the remote controllerRecording Select a recording modeSet the CD on the CD tray Activate the CD player Select a target group for recordingRecording Recording audio signals from external devices Select a recording mode see the onREC Mode button Select an input sourceSelect the adjusting level range Select the menu for adjusting recording levelAdjust the recording level Confirm the level settingActivate the HDD section Listening to tracks recorded on the HDDStart playback Stops playback Plays tracks repeatedly. see Listening to tracks recorded on the HDDDuring stopped During paused or playing Playing time for the first track in the current groupNaming tracks recorded on the HDD Selecting a letter you want to enter Naming tracks recorded on the HDDDeleting a letter Moving to a digitErasing tracks recorded on the HDD Erasing tracks recorded on the HDD Select the group erase modeSelect a group you want to record Erasing an entire groupActivate the play list creation mode Confirm your selection Select a position where you want to add a trackCreating a play list Select a play listWhen adding tracks to a play list When creating a play listCreating a play list Understanding the indication on play listsActivate the play list mode Listening to tracks using a play listListening to tracks using a play list Play List button Buttons Operation buttonActivate the play list mode Listening to tracks using a play listPlaying tracks in a play list in random order Playing tracks in a play list repeatedlyActivate the character-editing menu Editing the play listsEnter the play list name Confirm the entryEditing the play lists Select a play list you want to delete Activate the play-list deleting modeDeleting a play list EDIT/CLEAR/NO buttonActivate the play mode Using various playback featuresSelect a play mode Confirm the selectionActivate the favorite mode Using various playback featuresMark a track as your favorite Marking a track as you favorite Favorite IT functionWhen you use the random and repeat playback feature When you select a play list and enable the favorite modeMark a track as your Favorite Activate the favorite mode About combination of play modesSet the timer function Call the menu mode Using timer functionsSelect the timer setting menu Select a timer setting numberSet the start time and end time for the timer setting Using timer functionsConfirm the start time and the end time Set the day of the weekSpecifications Carry Tunes Overview of the supplied Carry Tunes software System Requirements Connect the MB-S1 to the PC using a USB cable Setting the PCInstalling the device driver Turn on the PCConfirming the installation of the device driver Setting the PCWhen using Windows 98SE/Me Click Install Installing the Carry TunesInsert the supplied CD-ROM into the CD- ROM drive on the PC Click NextClick Finish Installing the Carry TunesStart Carry Tunes Playing MP3 files using Carry TunesRegistering MP3 files with Carry Tunes Main operationsTransferring MP3 files to the MB-S1 故障？と思ったら 故障？と思ったら エラーメッセージ一覧 Page Onkyo Europe Electronics GmbH Onkyo U.S.A. CorporationPage Page
Top Page Image Contents