Panasonic 30003 manual Setting up the massage lounger, Where to use the unit

Page 10

Setting up the massage lounger

1 Where to use the unit

Ensure there is adequate space to recline.

Caution

Do not use the unit in areas with high humidity, such as the bathroom, because this can lead to electric shock or other accidents.

Place the unit on a totally flat surface.

Failure to do so may result in the unit tipping over.

Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of a heater, etc., as this can cause discoloration or hardening of the synthetic leather.

Place the unit on a mat to prevent floor damage.

When placing a mat under the unit, the size of the mat should be sufficient (at least 47 × 28 in. (120 × 70 cm)) to cover the areas where the unit touches and where the legrest could touch the floor, as shown in the diagram on the right.

Install the unit near a power outlet.

Keep at least 4" (10 cm) away from the wall.

Approx. 77" (195 cm)

Width approx. 33" (84 cm) Approx. 12" (30 cm)

Approx. 14" (35 cm)

Mat

 

 

 

 

 

 

 

 

 

 

Area where legrest

Area where unit

could touch the floor

touches the floor

2 Removing everything from the box and installing the unit

• Use care to prevent lower back and other injuries that could occur when lifting this heavy object (approx. 176 bs. (80 kg)). (The unit must be carried by two persons.)

• When using the wheels to move the unit, place a mat on the floor to protect the floor surface.

To put the unit down on the floor

Put the unit down slowly and carefully watch your step.

Put down the legrest by holding it with your hands until it has been set on the floor completely. If you release your hands before the legrest is fully extended, the legrest will forcefully return to the initial position.

Fabric Section

 

Place your

Groove

Hold the cloth

 

fingers in the

 

section on the

groove

 

underside

 

 

Legrest

Back cover

Mat

Image 10
Contents Operating Instructions Instrucciones de Uso Important Safety Instructions Safety Precautions Operating Precautions Grounding Instructions Figure aPart names and functions Main unitBack Control Panel Time Remaining Display During massage Voice Guidance Volume DisplaySelf-Program Setting Display Ultra Knead/Repeat DisplayRemoving everything from the box and installing the unit Setting up the massage loungerWhere to use the unit To put the unit down on the floorAccessories Width Approx 68 cm Height Approx 66 cm Length Approx 160 cmAttachingarmrests AssemblyAttachment Screw Control panel stand Hole Attachment screw Attaching the control panel stand coversOn both the right and left sides Raising the backrest to the upright position When removing the control panel stand coverConfiguration Gap Flat-tip ScrewdriverPlacing the control panel into the control panel stand Attach the pillow to the velcro fastener Attaching the pillowPillow Velcro fasteners Before sitting down Check the power cord and the power plugSwitching on the power supply Check the unitWhen the massage heads are not in the retracted position Program Massages Press the button to turn on the powerPress one of the flashing buttons To select Program When the massage starts During a massageOverview of the Pre-Program and Quick Massage Upper Body Self-Program Creating Self-ProgramsOpen the right cover and press the button Self-ProgramTo change the time and intensity in the middle of a massage Setting the Time and IntensityPress the button to start the program Massage SequenceManual Operation Manual Selection MassagesManual Operation Press Button to start the action Select the location you want to massageSelect the massage action Body scanning for Manual OperationFor additional operations Ultra Knead Shiatsu SwedishAdjusting the intensity Adjustments During a MassageAdjusting the speed Changing the programAdjustment of range of intensity Adjusting the positionWidth Adjustment Limits Range that can be massaged on the upper bodyOpen the left cover Press the button to turn each off or on Air Massage AdjustmentsAdjusting the intensity To execute the air massage onlyAdjust the legrest so that your feet fit snugly Adjusting the Legrest lengthFor the foot reflexology plate To execute the leg stretch massage only Using the leg stretch massageOperations of the leg stretch Lowered by approximately 10 degreesOttoman and Backrest height adjustment Approx ˚Legrest slide lever Press Button to adjust the volume Adjusting the voice guidance volumePress the button to shift the volume level by one up/down Adjusting the control panel stand Adjusting the control panel stand and pillowAdjusting the pillow for correct height during a massage Press the button used to save your settings Saving the user program settingsWhen the selected button starts flashing quickly Advanced user memory functionLeg stretch settings Settings that can be savedAir massage settings For Pre-Program, Quick Massage, and Self-ProgramErasing saved data Press the button to turn on the power After completing the massage When the massage is completeEmergency Stop Press the button Disconnecting the power Keep the lock switch key out of reach of childrenAreas covered with synthetic leather Cleaning and MaintenanceWipe these areas with a soft, dry cloth Lifting the Unit Moving the UnitDo not move the unit while someone is seated in it Using the wheels to move the unit Trouble Shooting Specifications Panasonic Consumer Electronics Company

30003 specifications

The Panasonic 30003 is a state-of-the-art device designed to enhance user experience in various technological applications. This model features a sleek, modern design that resonates with contemporary aesthetics, making it an attractive addition to any environment. It is engineered with advanced technology to provide exceptional performance, reliability, and ease of use.

One of the hallmark features of the Panasonic 30003 is its high-definition display, which delivers crisp and vivid visuals. The screen utilizes cutting-edge LCD technology, ensuring rich color representation and excellent contrast. Whether for entertainment purposes or professional applications, users can enjoy a multimedia experience that captivates the senses.

Another noteworthy characteristic is its robust processing power, achieved through a specialized microprocessor that allows for rapid data handling and multitasking capabilities. This ensures fluid operation across various applications, making it suitable for both personal and professional use. The device is capable of running demanding software without lag, enhancing productivity significantly.

Connectivity is a strong focus for the Panasonic 30003, equipped with multiple ports including USB, HDMI, and Wi-Fi compatibility. Users can easily connect external devices, stream content, and share information without the hassle of physical connections. The inclusion of Bluetooth technology also allows seamless integration with a variety of peripherals, enriching the overall user experience.

Additionally, the Panasonic 30003 is designed with energy efficiency in mind. Its intelligent power management system helps reduce energy consumption while maintaining high performance levels. This not only contributes to lower operational costs but also aligns with sustainable practices, making it an environmentally friendly choice for eco-conscious consumers.

Safety features are paramount in the design of the Panasonic 30003. The device incorporates advanced security protocols to protect user data and ensure safe operation. Its durable build quality also enhances longevity, allowing it to withstand daily wear and tear.

In summary, the Panasonic 30003 combines a sleek design with powerful performance and innovative technology, making it an ideal choice for users looking for reliability and versatility in their electronic devices. With features that support both entertainment and productivity, it stands out as a top contender in its category, appealing to a wide range of users across various fields.