Panasonic 30003 manual Specifications

Page 45

Problem

 

Cause and Remedy

 

The unit will not operate at all.

 

• The power cord has been disconnected. (See page 16)

• Upper body (neck to lower back) massage

 

• The power switch on the unit has not been turned on.

• Lower body (calves) massage

 

• A Pre-Program button or Manual Operation button hasn’t

 

 

 

 

been pressed after pressing

.

 

 

 

 

Sometimes the power won’t turn on when

is pressed

Approximately 5 seconds are required for program termination

after a massage finishes. Wait at least 5 seconds once all

again when a massage has finished.

 

 

 

movement has stopped before pressing

.

 

 

 

 

 

The unit has been damaged.

 

Stop using the unit immediately.

 

 

The power cord or power plug is abnormally hot.

Stop using the unit immediately.

 

 

Warning

•Do not attempt to repair, disassemble or modify the unit.

Failure to observe this precaution may result in fire or injury due to malfunctioning.

Caution

•Unplug the power plug immediately and contact a customer service center to arrange for repairs if the unit ceases to function or is otherwise not working properly.

Failure to observe this precaution may result in electric shock or fire.

SPECIFICATIONS

Power supply

Power consumption

 

Massage area (Up-Down)

Upper

Massage area (Left-Right)

Massage area (Forward-back)

body

Massage speed

massage

Lateral/Vertical Travel

 

 

Massage width

Air massage

Air Pressure (Calf)

 

Reclining angle

Automatic Shut-off

Dimensions

When not reclined

(H × W × D)

 

(H × W × D)

 

When reclined

Weight of Unit

Dimension of box (H × W × D)

Weight in box

Maximum user weight

Minimum distance from wall

AC 120 V 60 Hz

175 W

Approx. 30 in. (76 cm) (The massage heads move a total of approx. 26 in. (65 cm))

Distance between massage heads during operation (massage width adjustable) Neck, Shoulder, Back, Lower back: Approx. 3 – 8 in. (7 – 21 cm)

Projected amount of massage head (Intensity adjustable)

Approx. 4 in. (10 cm)

Tap: Approx. 250 – 450 cycles/minute (single side)

Full roll: Approx. 26 – 92 seconds (both ways)

Other than the above: approx. 6 – 50 cycles/minute

Lateral travel: Approx. 1.5 in. (3.8 cm) left-right auto return

Vertical travel (Long): Approx. 30 in. (76 cm) up-down auto return

Vertical travel (Short): Approx. 4 in. (10 cm) up-down auto return

Full roll, Vertical Movement: Approx. 3 – 7 in. (7 – 18 cm)

Other than the above: Same as massage area (left-right)

5:Approx. 32 kPa

4:Approx. 29 kPa

3:Approx. 21 kPa

2:Approx. 11 kPa

1:Approx. 4 kPa

* It may vary with the area slightly.

Backrest: Approx 120˚ – 170˚

Legrest: Approx 0˚ – 85˚

Automatically turns off after approx. 15 minutes (approx. 5 minutes for the quick massage)

Approx. 47.2 × 33.1 × 50 in. (120 × 84 × 127 cm)

Approx. 28.3 × 33.1 × 76.8 in. (72 × 84 × 195 cm)

Approx. 159 lbs. (72 kg)

Approx. 28.3 × 30.7 × 65.4 in. (72 × 78 × 166 cm)

Approx. 194 lbs. (88 kg)

Approx. 264 lbs (120 kg)

15.7 in. (40 cm)

44

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Operating Instructions Instrucciones de Uso Important Safety Instructions Safety Precautions Operating Precautions Figure a Grounding InstructionsMain unit Part names and functionsBack Control Panel Self-Program Setting Display Voice Guidance Volume DisplayTime Remaining Display During massage Ultra Knead/Repeat DisplayWhere to use the unit Setting up the massage loungerRemoving everything from the box and installing the unit To put the unit down on the floorWidth Approx 68 cm Height Approx 66 cm Length Approx 160 cm AccessoriesAssembly AttachingarmrestsAttachment Screw Attaching the control panel stand covers Control panel stand Hole Attachment screwOn both the right and left sides Configuration When removing the control panel stand coverRaising the backrest to the upright position Gap Flat-tip ScrewdriverPlacing the control panel into the control panel stand Attaching the pillow Attach the pillow to the velcro fastenerPillow Velcro fasteners Switching on the power supply Check the power cord and the power plugBefore sitting down Check the unitWhen the massage heads are not in the retracted position Press the button to turn on the power Program MassagesPress one of the flashing buttons To select Program During a massage When the massage startsOverview of the Pre-Program and Quick Massage Upper Body Open the right cover and press the button Creating Self-ProgramsSelf-Program Self-ProgramPress the button to start the program Setting the Time and IntensityTo change the time and intensity in the middle of a massage Massage SequenceManual Selection Massages Manual OperationManual Operation Select the massage action Select the location you want to massagePress Button to start the action Body scanning for Manual OperationUltra Knead Shiatsu Swedish For additional operationsAdjusting the speed Adjustments During a MassageAdjusting the intensity Changing the programWidth Adjustment Limits Adjusting the positionAdjustment of range of intensity Range that can be massaged on the upper bodyAdjusting the intensity Air Massage AdjustmentsOpen the left cover Press the button to turn each off or on To execute the air massage onlyAdjusting the Legrest length Adjust the legrest so that your feet fit snuglyFor the foot reflexology plate Operations of the leg stretch Using the leg stretch massageTo execute the leg stretch massage only Lowered by approximately 10 degreesApprox ˚ Ottoman and Backrest height adjustmentLegrest slide lever Adjusting the voice guidance volume Press Button to adjust the volumePress the button to shift the volume level by one up/down Adjusting the control panel stand and pillow Adjusting the control panel standAdjusting the pillow for correct height during a massage When the selected button starts flashing quickly Saving the user program settingsPress the button used to save your settings Advanced user memory functionAir massage settings Settings that can be savedLeg stretch settings For Pre-Program, Quick Massage, and Self-ProgramErasing saved data Press the button to turn on the power When the massage is complete After completing the massageEmergency Stop Press the button Keep the lock switch key out of reach of children Disconnecting the powerCleaning and Maintenance Areas covered with synthetic leatherWipe these areas with a soft, dry cloth Moving the Unit Lifting the UnitDo not move the unit while someone is seated in it Using the wheels to move the unit Trouble Shooting Specifications Panasonic Consumer Electronics Company

30003 specifications

The Panasonic 30003 is a state-of-the-art device designed to enhance user experience in various technological applications. This model features a sleek, modern design that resonates with contemporary aesthetics, making it an attractive addition to any environment. It is engineered with advanced technology to provide exceptional performance, reliability, and ease of use.

One of the hallmark features of the Panasonic 30003 is its high-definition display, which delivers crisp and vivid visuals. The screen utilizes cutting-edge LCD technology, ensuring rich color representation and excellent contrast. Whether for entertainment purposes or professional applications, users can enjoy a multimedia experience that captivates the senses.

Another noteworthy characteristic is its robust processing power, achieved through a specialized microprocessor that allows for rapid data handling and multitasking capabilities. This ensures fluid operation across various applications, making it suitable for both personal and professional use. The device is capable of running demanding software without lag, enhancing productivity significantly.

Connectivity is a strong focus for the Panasonic 30003, equipped with multiple ports including USB, HDMI, and Wi-Fi compatibility. Users can easily connect external devices, stream content, and share information without the hassle of physical connections. The inclusion of Bluetooth technology also allows seamless integration with a variety of peripherals, enriching the overall user experience.

Additionally, the Panasonic 30003 is designed with energy efficiency in mind. Its intelligent power management system helps reduce energy consumption while maintaining high performance levels. This not only contributes to lower operational costs but also aligns with sustainable practices, making it an environmentally friendly choice for eco-conscious consumers.

Safety features are paramount in the design of the Panasonic 30003. The device incorporates advanced security protocols to protect user data and ensure safe operation. Its durable build quality also enhances longevity, allowing it to withstand daily wear and tear.

In summary, the Panasonic 30003 combines a sleek design with powerful performance and innovative technology, making it an ideal choice for users looking for reliability and versatility in their electronic devices. With features that support both entertainment and productivity, it stands out as a top contender in its category, appealing to a wide range of users across various fields.
Top Page Image Contents