Panasonic 30003 manual Trouble Shooting

Page 44

TROUBLE SHOOTING

Problem

Cause and Remedy

Motor Noises

These sounds are perfectly normal and will not have any effect

• It sounds and feels like the massage heads are straining to

on the operation of the unit.

get over wrinkles in the cloth.

 

•The motor groans when it comes under load.

•There is excessive noise during Tapping. (The noise is greater at the top of the massage lounger.)

•There is a creaking noise when the massage heads are in operation.

•There is a rattling sound when the massage heads move up or down.

•The belt can be heard rotating.

•There is a rubbing sound produced by the massage heads rubbing on the seat fabric.

•There is a noise when the back cushion moves over the armrest when the seat is reclining.

•There is a noise when I sit down.

•There is a strange sound when the massage heads move in and out.

•There is operational noise when applying air pressure.

•There is a noise of discharging air.

•The legrest rattles.

•There is a humming sound from the pump.

•There is operational noise of valves under the seat.

•There is an unstable sound when air escapes during the leg stretch.

The massage heads stop during operation.

If excessive force is applied to the massage heads during

 

operation, in the interests of safety the massage heads may

 

stop moving.

 

 

If all markings and buttons on the control panel start to flash,

 

which is extremely unusual, turn off the power switch, wait for

 

approximately 10 seconds and then turn the power switch on

 

again.

 

 

If the massage heads stop again, position yourself so that your

 

back is not completely in contact with the backrest. (Caution

 

should be exercised particularly when used by persons

 

 

weighing 220 lbs (100 kg) or more.)

 

The massage heads do not come up to the shoulder or

If your head does not contact the pillow or your back does not

neck.

contact the backrest, the shoulder position may be detected as

 

lower than the actual position during the body scanning. Sit on

 

the seat in the deepest position and put your head on the

 

pillow, and then repeat the operations again from the start.

 

(See page 19)

The height of the left and right massage heads is

An alternating tapping method is employed, which means that

different.

this phenomenon will naturally occur. There is nothing wrong

 

with the unit.

 

 

 

It is not possible to recline the unit.

If the unit encounters an obstacle or if excessive force is

The legrest cannot be raised or lowered.

exerted on it during operation, in the interests of safety the unit

 

will come to a stop.

 

 

When all displays and buttons are flashing and the backrest or

 

the legrest has stopped, turn off the power of the unit once,

 

turn “on” the power again after approximately 10 seconds, and

 

then operate the unit.

 

Reclining does not take place even though a massage is

In some cases the seat may not automatically recline

 

started in pre-programs.

depending on the position (angle) of the backrest or the

(The seat does not automatically recline.)

legrest.

 

 

 

The backrest does not return to the upright position.

If the unit is stopped by automatic shut-off or by pressing the

 

button, it will not return automatically. (To return from the

 

reclined position to the original position, press the

button

 

twice.)

 

43

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Operating Instructions Instrucciones de Uso Important Safety Instructions Safety Precautions Operating Precautions Grounding Instructions Figure aPart names and functions Main unitBack Control Panel Voice Guidance Volume Display Self-Program Setting DisplayTime Remaining Display During massage Ultra Knead/Repeat DisplaySetting up the massage lounger Where to use the unitRemoving everything from the box and installing the unit To put the unit down on the floorAccessories Width Approx 68 cm Height Approx 66 cm Length Approx 160 cmAttachment Screw AssemblyAttachingarmrests On both the right and left sides Attaching the control panel stand coversControl panel stand Hole Attachment screw When removing the control panel stand cover ConfigurationRaising the backrest to the upright position Gap Flat-tip ScrewdriverPlacing the control panel into the control panel stand Pillow Velcro fasteners Attaching the pillowAttach the pillow to the velcro fastener Check the power cord and the power plug Switching on the power supplyBefore sitting down Check the unitWhen the massage heads are not in the retracted position Press one of the flashing buttons To select Program Press the button to turn on the powerProgram Massages When the massage starts During a massageOverview of the Pre-Program and Quick Massage Upper Body Creating Self-Programs Open the right cover and press the buttonSelf-Program Self-ProgramSetting the Time and Intensity Press the button to start the programTo change the time and intensity in the middle of a massage Massage SequenceManual Operation Manual Selection MassagesManual Operation Select the location you want to massage Select the massage actionPress Button to start the action Body scanning for Manual OperationFor additional operations Ultra Knead Shiatsu SwedishAdjustments During a Massage Adjusting the speedAdjusting the intensity Changing the programAdjusting the position Width Adjustment LimitsAdjustment of range of intensity Range that can be massaged on the upper bodyAir Massage Adjustments Adjusting the intensityOpen the left cover Press the button to turn each off or on To execute the air massage onlyFor the foot reflexology plate Adjusting the Legrest lengthAdjust the legrest so that your feet fit snugly Using the leg stretch massage Operations of the leg stretchTo execute the leg stretch massage only Lowered by approximately 10 degreesOttoman and Backrest height adjustment Approx ˚Legrest slide lever Press the button to shift the volume level by one up/down Adjusting the voice guidance volumePress Button to adjust the volume Adjusting the pillow for correct height during a massage Adjusting the control panel stand and pillowAdjusting the control panel stand Saving the user program settings When the selected button starts flashing quicklyPress the button used to save your settings Advanced user memory functionSettings that can be saved Air massage settingsLeg stretch settings For Pre-Program, Quick Massage, and Self-ProgramErasing saved data Press the button to turn on the power Emergency Stop Press the button When the massage is completeAfter completing the massage Disconnecting the power Keep the lock switch key out of reach of childrenWipe these areas with a soft, dry cloth Cleaning and MaintenanceAreas covered with synthetic leather Do not move the unit while someone is seated in it Moving the UnitLifting the Unit Using the wheels to move the unit Trouble Shooting Specifications Panasonic Consumer Electronics Company

30003 specifications

The Panasonic 30003 is a state-of-the-art device designed to enhance user experience in various technological applications. This model features a sleek, modern design that resonates with contemporary aesthetics, making it an attractive addition to any environment. It is engineered with advanced technology to provide exceptional performance, reliability, and ease of use.

One of the hallmark features of the Panasonic 30003 is its high-definition display, which delivers crisp and vivid visuals. The screen utilizes cutting-edge LCD technology, ensuring rich color representation and excellent contrast. Whether for entertainment purposes or professional applications, users can enjoy a multimedia experience that captivates the senses.

Another noteworthy characteristic is its robust processing power, achieved through a specialized microprocessor that allows for rapid data handling and multitasking capabilities. This ensures fluid operation across various applications, making it suitable for both personal and professional use. The device is capable of running demanding software without lag, enhancing productivity significantly.

Connectivity is a strong focus for the Panasonic 30003, equipped with multiple ports including USB, HDMI, and Wi-Fi compatibility. Users can easily connect external devices, stream content, and share information without the hassle of physical connections. The inclusion of Bluetooth technology also allows seamless integration with a variety of peripherals, enriching the overall user experience.

Additionally, the Panasonic 30003 is designed with energy efficiency in mind. Its intelligent power management system helps reduce energy consumption while maintaining high performance levels. This not only contributes to lower operational costs but also aligns with sustainable practices, making it an environmentally friendly choice for eco-conscious consumers.

Safety features are paramount in the design of the Panasonic 30003. The device incorporates advanced security protocols to protect user data and ensure safe operation. Its durable build quality also enhances longevity, allowing it to withstand daily wear and tear.

In summary, the Panasonic 30003 combines a sleek design with powerful performance and innovative technology, making it an ideal choice for users looking for reliability and versatility in their electronic devices. With features that support both entertainment and productivity, it stands out as a top contender in its category, appealing to a wide range of users across various fields.
Top Page Image Contents