Panasonic 30003 manual Attaching the control panel stand covers, On both the right and left sides

Page 13
Control panel stand

2 Attaching the control panel stand to the right or left side panel of the unit

(Diagram shows attachment to right armrest.)

1.Insert the attachment screw into the lower hole first

The position of the control panel when seated can be

and then tighten lightly by hand.

selected by choosing the appropriate hole for the screw.

 

2.Securing the stand with the attachment screws.

Near

Approx.

Tighten the two screws for the remaining two holes

 

20˚

lightly by hand and then tighten firmly with the allen key.

 

 

Far

 

 

Control panel stand

 

 

 

2

 

1 Insert the attachment

 

 

screw in either hole and

 

To attach the control panel stand using the attachment

then tighten.

 

Attachment screw

Allen key

screws, tighten the screws level with the holes as

shown in the figure below.

 

 

Use this screw

Attachment Screw (M6 × 16)

× 3 (Silver × 3)

If the screws are tightened at an angle, the hole may become deformed and the screws may become stuck in the middle.

Control panel stand

Hole

Attachment screw

Attachment

 

Hole

screw

 

Allen key

Allen key

 

 

 

Tighten the screws

Do not tighten the

 

screw at an angle

 

level with the holes.

 

with the hole.

 

 

3 Attaching the control panel stand covers

(On both the right and left sides)

The method for attaching the covers is the same for both sides. The diagram shows the side where the control panel stand is attached.

Cover for Side WITH

Cover for Side WITHOUT

Control Panel Stand

Control Panel Stand

1.Insert the top tabs on the cover into the bottom notches on the armrest.

Notches

2.Insert the bottom tabs into the notches on the armrest.

Bottom tabs

 

Control panel

 

stand cover

Top tabs

Notches

Push the cover until you hear it click.

12

Image 13
Contents Operating Instructions Instrucciones de Uso Important Safety Instructions Safety Precautions Operating Precautions Figure a Grounding InstructionsMain unit Part names and functionsBack Control Panel Self-Program Setting Display Voice Guidance Volume DisplayTime Remaining Display During massage Ultra Knead/Repeat DisplayWhere to use the unit Setting up the massage loungerRemoving everything from the box and installing the unit To put the unit down on the floorWidth Approx 68 cm Height Approx 66 cm Length Approx 160 cm AccessoriesAttachingarmrests AssemblyAttachment Screw Control panel stand Hole Attachment screw Attaching the control panel stand coversOn both the right and left sides Configuration When removing the control panel stand coverRaising the backrest to the upright position Gap Flat-tip ScrewdriverPlacing the control panel into the control panel stand Attach the pillow to the velcro fastener Attaching the pillowPillow Velcro fasteners Switching on the power supply Check the power cord and the power plugBefore sitting down Check the unitWhen the massage heads are not in the retracted position Program Massages Press the button to turn on the powerPress one of the flashing buttons To select Program During a massage When the massage startsOverview of the Pre-Program and Quick Massage Upper Body Open the right cover and press the button Creating Self-ProgramsSelf-Program Self-ProgramPress the button to start the program Setting the Time and IntensityTo change the time and intensity in the middle of a massage Massage SequenceManual Operation Manual Selection MassagesManual Operation Select the massage action Select the location you want to massagePress Button to start the action Body scanning for Manual OperationUltra Knead Shiatsu Swedish For additional operationsAdjusting the speed Adjustments During a MassageAdjusting the intensity Changing the programWidth Adjustment Limits Adjusting the positionAdjustment of range of intensity Range that can be massaged on the upper bodyAdjusting the intensity Air Massage AdjustmentsOpen the left cover Press the button to turn each off or on To execute the air massage onlyAdjust the legrest so that your feet fit snugly Adjusting the Legrest lengthFor the foot reflexology plate Operations of the leg stretch Using the leg stretch massageTo execute the leg stretch massage only Lowered by approximately 10 degreesApprox ˚ Ottoman and Backrest height adjustmentLegrest slide lever Press Button to adjust the volume Adjusting the voice guidance volumePress the button to shift the volume level by one up/down Adjusting the control panel stand Adjusting the control panel stand and pillowAdjusting the pillow for correct height during a massage When the selected button starts flashing quickly Saving the user program settingsPress the button used to save your settings Advanced user memory functionAir massage settings Settings that can be savedLeg stretch settings For Pre-Program, Quick Massage, and Self-ProgramErasing saved data Press the button to turn on the power After completing the massage When the massage is completeEmergency Stop Press the button Keep the lock switch key out of reach of children Disconnecting the powerAreas covered with synthetic leather Cleaning and MaintenanceWipe these areas with a soft, dry cloth Lifting the Unit Moving the UnitDo not move the unit while someone is seated in it Using the wheels to move the unit Trouble Shooting Specifications Panasonic Consumer Electronics Company

30003 specifications

The Panasonic 30003 is a state-of-the-art device designed to enhance user experience in various technological applications. This model features a sleek, modern design that resonates with contemporary aesthetics, making it an attractive addition to any environment. It is engineered with advanced technology to provide exceptional performance, reliability, and ease of use.

One of the hallmark features of the Panasonic 30003 is its high-definition display, which delivers crisp and vivid visuals. The screen utilizes cutting-edge LCD technology, ensuring rich color representation and excellent contrast. Whether for entertainment purposes or professional applications, users can enjoy a multimedia experience that captivates the senses.

Another noteworthy characteristic is its robust processing power, achieved through a specialized microprocessor that allows for rapid data handling and multitasking capabilities. This ensures fluid operation across various applications, making it suitable for both personal and professional use. The device is capable of running demanding software without lag, enhancing productivity significantly.

Connectivity is a strong focus for the Panasonic 30003, equipped with multiple ports including USB, HDMI, and Wi-Fi compatibility. Users can easily connect external devices, stream content, and share information without the hassle of physical connections. The inclusion of Bluetooth technology also allows seamless integration with a variety of peripherals, enriching the overall user experience.

Additionally, the Panasonic 30003 is designed with energy efficiency in mind. Its intelligent power management system helps reduce energy consumption while maintaining high performance levels. This not only contributes to lower operational costs but also aligns with sustainable practices, making it an environmentally friendly choice for eco-conscious consumers.

Safety features are paramount in the design of the Panasonic 30003. The device incorporates advanced security protocols to protect user data and ensure safe operation. Its durable build quality also enhances longevity, allowing it to withstand daily wear and tear.

In summary, the Panasonic 30003 combines a sleek design with powerful performance and innovative technology, making it an ideal choice for users looking for reliability and versatility in their electronic devices. With features that support both entertainment and productivity, it stands out as a top contender in its category, appealing to a wide range of users across various fields.