Installation Instructions

Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installa- tion. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance.

1.The pump should be installed flat on a base to a maximum of a 15 degree angle of inclination to ensure optimum lubrication.

2.The inlet to the pump should be sized for the flow rate of the pump with no unnecessary restrictions that can cause cavitation. Teflon tape should be used to seal all joints. If pumps are to be operated at temperatures in excess of

1600 F, it is important to insure a positive head to the pump to prevent cavitation.

3.The discharge plumbing from the pump should be properly sized to the flow rate to prevent line pressure loss to the work area. It is essential to provide a safety bypass valve between the pump and the work area to protect the pump from pressure spikes in the event of a blockage or the use of a shut-off gun.

4.Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of pressure spikes that occur in systems using a shut-off gun. A dampener must be positioned downstream from the unloader.

5.Crankshaft rotation on Giant Industries, Inc. pumps should be made in the direction desig- nated by the arrows on the pump crankcase. Reverse rotation may be safely achieved by following a few guidelines available upon request from Giant Industries, Inc. Required horsepower for system operation can be ob- tained from the charts on pages 3-9.

6.Before beginning operation of your pumping system, remember: Check that the crankcase and seal areas have been properly lubricated per recommended schedules. Do not run the pump dry for extended periods of time. Cavitation will result in severe damage. Always remember to check that all plumbing valves are open and that pumped media can flow freely to the inlet of the pump.

Finally, remember that high pressure operation in a pump system has many advantages. But, if it is used carelessly and without regard to its potential hazard, it can cause serious injury.

IMPORTANT OPERATING CONDITIONS

Failure to comply with any of these conditions invalidates the warranty.

1.Prior to initial operation, add oil to the crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL.

Use Giant 20W-50 oil (p/n 01153)

Crankcase oil should be changed after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.

2.Pump operation must not exceed rated pressure, volume, or RPM. A pressure relief device must be installed in the discharge of the system.

3.Acids, alkalines, or abrasive fluids cannot be pumped unless approval in writing is obtained before operation from Giant Industries, Inc.

4.Run the pump dry approximately 10 seconds to drain the water before exposure to freezing temperatures.

P206, P207, P209, P211, P210 specifications

Giant is a renowned name in the cycling world, producing a wide range of bicycles that cater to every type of rider. Among their extensive lineup, the P-series models, specifically the P205, P208, P210, P211, and P209, stand out for their innovative design and robust performance. These bikes are tailored for both casual and serious cyclists, embodying Giant's commitment to quality and technology.

The Giant P205 is an entry-level model that provides excellent value for beginner cyclists. It features a lightweight aluminum frame, which enhances maneuverability and makes it easy to handle. The bike is equipped with a reliable gear system that ensures smooth shifting, catering to various terrains. Its comfortable seating allows for long rides without discomfort, making it ideal for leisurely outings.

The P208 brings a step up in terms of performance, featuring an upgraded suspension system. This makes it an excellent choice for riders who want to tackle more rugged trails. The bike's advanced braking system has been engineered for quick stopping, providing a sense of safety and control. Its wider tires offer improved grip, making it suited for diverse riding conditions.

The P210 is designed for performance enthusiasts. It boasts a lightweight carbon composite frame that delivers exceptional speed and agility. This model is equipped with high-quality components, including precision gear shifting and enhanced aerodynamic features. The P210 stands out for its versatility, making it perfect for both competitive races and long-distance rides.

Moving on to the P211, this bike is engineered for the serious cyclist who seeks a challenging experience. It comes with an advanced electronic shifting mechanism that ensures flawless transitions between gears. The elevated level of customization available for the P211 allows riders to tailor the bike to their specific preferences. Its robust construction means it can withstand more demanding trails while retaining smooth performance.

Finally, the P209 represents the pinnacle of the P series. This bike incorporates cutting-edge technology, featuring an integrated power meter and advanced telemetry systems that provide real-time performance data. The P209 is geared towards professional cyclists who require the highest level of precision and performance. Its state-of-the-art frame design emphasizes aerodynamics and lightweight characteristics, making it a top choice for serious racers.

In summary, the Giant P205, P208, P210, P211, and P209 exemplify Giant's dedication to innovation and excellence. Each model has unique features that cater to different riding styles and preferences, ensuring that there is a Giant bike for everyone. From beginner to professional, cyclists can find a reliable companion in the P series to enhance their riding experience.