VocoPro manual Recording with the RECODE-1

Recording with the RECODE-1

The RECODE-1 has 512 MB of internal memory that will provide approximately 8 hours of available time (128 kbps).

1.Power on the RECODE-1 by holding the POWER button, hold until POWER LED lights up

2.Ensure that the RECODE-1 is connected to your source via the included 1/8” to RCA cable

3.Hold the RECORD button to initiate recording mode, the RECORD INDICATOR will blink, and then press PLAY to start recording.

4.Stop the recording with the STOP function and power the unit OFF.

• Your source will be recorded as a 128 kbps Mp3 file. If the memory limit is reached before recording is manually ended, the RECODE-1 will stop recording and automati- cally save your file. It is recommended that you replace the battery before beginning a new recording session.

If additional memory is required, utilize expandable SD Memory Card (Not Included)

15