FCC Information cont.
Keep it in a safe place for future reference.
2.Install your unit in a cool, dry, clean place - away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transform- ers, v motors). To prevent fire or electrical shock, do not expose to rain and water.
3.Do not operate the unit up side- down.
4.Never open the cabinet. If a foreign object drops into the set, contact your dealer.
5.Place the unit in a location with adequate air circulation. Do not interfere with its proper ventila- tion; this will cause the internal temperature to rise and may result in a failure.
6.Do not use force on switches, knobs or cords. When moving the unit, first turn the unit off.
Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.
7.Do not attempt to clean the unit with chemical solvents: this might damage the finish. Use a clean, dry cloth.
8.Be sure to read the “Trouble- shooting” section on common operating errors before conclud ing that your unit is faulty.
9.This unit consumes a fair amount
of power even when the power switch is turned off. We recom- mend that you unplug the power cord from the wall outlet if the unit is not going to be used for a long time. This will save electricity and help prevent fire hazards. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself.
10.To prevent lightning damage, pull out the power cord and remove the antenna cable during an electrical storm.
11.The general digital signals may interfere with other equipment such as tuners or receivers.
Move the system farther away from such equipment if interfer- ence is observed.
NOTE.
Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws.
Voltage Selector (General Model Only)
Be sure to position the voltage selector to match the voltage of your local power lines before installing the unit.
110V
7