VocoPro RECODE-1 manual Descriptions & Functions, Front View

Page 18

Descriptions & Functions

FRONT VIEW

1.POWER - Hold the POWER button to turn the unit on or off. The POWER INDICATOR will be lit green if the unit is on.

2.RECORD - Hold the RECORD button to initiate recording mode, the RECORD INDICATOR will blink, and then press PLAY to start recording.

3.PLAY - Enable playback mode to review recorded Mp3 files

4.STOP - Stops recording mode or playback

5.PREV/NEXT - Press PREV to jump to the previous track and NEXT to jump to the next track.

6.POWER INDICATOR - This will be lit green to indicate when the unit is powered on.

7.PLAY INDICATOR - This will be lit orange to indicate when playback mode is enabled. It will also be lit during record mode.

8.RECORD INDICATOR - This will be lit red to indicate record mode is enabled.

9.VOLUME LEVEL INDICATOR - These lights indicate the volume output level of the RECODE-1. The volume is at the maximum level when all of

18

Image 18
Contents RECODE-1 Page Table of Contents Safety Instructions Risk of ShockSafety FCC Information U.S.A FCC Information Listening for a Lifetime Welcome For Your RecordsFeatures Getting Started Connecting a Source to the RECODE-1 Getting ConnectedRECODE-1 Playback Mode Getting Connected Recording with the RECODE-1 Recording Utilizing Expandable SD MemoryConnecting the RECODE-1 to a PC or MAC Computer Descriptions & Functions Front ViewDescriptions Rear View Bottom View Troubleshooting Recording file is corrupt & will not playTroubleshooting