Front panel descriptions

Front Panel

GIG MAN PLUS PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM

MUSIC EQ

60Hz

200Hz 400Hz

1KHz

3KHz

6KHz

16KHz

POWER

+12dB

BASS

TREBLE

ECHO

REPEAT

DELAY

0dB

INPUT

DISC

+10

TUNER

-12dB

MIC EFFECTS

AV1

60Hz

200Hz 400Hz

1KHz

3KHz

6KHz

16KHz

AV2

PRESETS

MUSIC VOLUME

PLAY

PAUSE

EJECT

MIC VOLUME

VOCAL

EQ ON

CANCEL

STOP

PBC

B-SCAN

F-SCAN

MUTE

L/R

REPEAT

EQ OFF

VOCAL

PARTNER

AM/FM

AUTO

PRESET

ST/MO

DIGITAL KEY CONTROLLER

AV2 INPUT

HEADPHONES

VOLUME

KEYBOARD

VOLUME

GUITAR

MIC1

MIC2

VOL1

VOL2

1.POWER button - This button is used to turn the GIG MAN PLUS ‘ON’ or place it in STANDBY mode.

NOTE: When in STANDBY mode, the GIG MAN PLUS is not completely powered down and it still contains residual power.

2.INPUT button - This button toggles through all of the INPUT channels (DISC, TUNER, AV1, AV2) for available INPUT SOURCES.

3.7-BAND GRAPHIC EQUALIZER - This GRAPHIC EQ is used to BOOST and/or CUT particular frequencies from SOURCE MUSIC output. Each slide fader processes a particular frequency range indicated by the number above it. Frequencies from 30Hz - 120Hz constitute the very low to low range. Frequencies from 120Hz to 1kHz are the mid- range and frequencies from 1kHz to 16kHz make up the high to very high range. To adjust, slide the fader up to boost the frequency presence or down to cut the frequency presence.

4.GRAPHIC DISPLAY panel - This panel displays all graphical information regarding system operations, settings and performance.

5.DIRECT TRACK ACCESS buttons - These buttons allow for DIRECT TRACK selection. For tracks 10 and up, press the +10 button. For example, to go directly to track 13, you would press +10 and 3, and for track 22, you would press +10, +10 and 2.

6.REMOTE SENSOR - This sensor receives infrared signals transmitted by the REMOTE CONTROL transmitter. NOTE: Obstacles located between the remote control and remote sensor should be avoided as they can prevent signal recognition.

7.BASS control - This control increases/decreases the amount of LOW frequency response applied to the MASTER VOLUME output.

8.TREBLE control - This control increases/decreases the amount of HIGH frequency response applied to the MASTER VOLUME output.

9.ECHO LEVEL control - This control adjusts the level of ECHO applied to the MIC channels. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.

10.REPEAT control - Use this control to adjust the REPEAT setting of the ECHO effect. As REPEAT adjusts the total number of echo intervals prior to fade-out, the more REPEAT that is applied, the more ECHO intervals will occur prior to fade-out. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.