Remote Control

Remote control descriptions

4.SET A/B button - This feature allows you to select a section of the disc for repeat playback.

2	3		While a disc is playing, press the A/B button
2	3		once to select the beginning point of the sele-
			once to select the beginning point of the sele-
			ction. Press the A/B button again to select the
			end point of the selection. Playback of the
		6	selection will start automatically. Press the A/B
		6	button again to cancel this feature and return to
			button again to cancel this feature and return to
		7	normal playback.
	SLOW	7
	AM/FM		5. BOOKMARK button - Press the BOOKMARK
	VIDEO	9	5. BOOKMARK button - Press the BOOKMARK
	VIDEO		button to set a memory point on the disc. Press
	AUTO		button to set a memory point on the disc. Press
	AUTO
PRESETS	AUDIO	10	the RESUME button at any time to jump to the
	ST/MO	11	BOOKMARK point and resume playback.
			BOOKMARK point and resume playback.

		13	6. PROGRAM button - Press this button to enter
			track PROGRAM mode. The disc must be

stopped to enter PROGRAM mode. See the PROGRAM function in the Advanced Operation section of this manual for a detailed explanation of this feature.

PRESET/SEARCH

DISC	AV1	CANCEL
TUNER	AV2	VOCAL
		PARTNER

1.POWER button - This button is used to turn the GIG MAN PLUS ‘ON’ or place it in STANDBY mode.

NOTE: When in STANDBY mode, the GIG MAN PLUS

is not completely powered down and still contains residual power.

2.STOP button - This button is used to STOP disc PLAY- BACK.

3.OPEN/CLOSE button - This button is used to OPEN/ CLOSE the DISC tray.

7.MUTE button - Press this button to MUTE or silence the audio track during playback. Press MUTE a second time to restore the audio playback.

8.NUMBER pad - Use these buttons for direct track selection, selecting tracks in program mode or any other occasion where numeric entry is needed. The +10 button adds 10 to the track number each time it is pressed: 10, 20, 30 etc.

9.SLOW button - Press this button to playback in slow motion. Press SLOW to cycle through the 4 available playback speeds: 1/2 speed, 1/4 speed, 1/8 speed and normal. Press the PLAY button to cancel slow-motion playback.

10.VIDEO button - Use this button to select between NTSC/PAL video modes. For U.S., Mexico, and Canada, select NTSC. For European countries, select PAL.

11.AUDIO button - This button is used to select the audio playback mode: LEFT/LEFT, RIGHT/ RIGHT and STEREO

12.STEP button - Press this button to playback the video one frame at a time. Each press of the step button will advance the video one frame. Press the PLAY button to return to normal playback.

13.RESUME button - This button is used to jump to the point on the disc previously marked using the BOOKMARK feature.