Using the Remote Control

Remote control descriptions cont

Remote Control

SLOW

AM/FM

VIDEO

AUTO

PRESETS AUDIO

ST/MO

27.VOCAL PARTNER button - This feature acts very similar to the vocal cancel feature, but with an added voice activation feature that acts

like a vocal “auto-pilot”. When you utilize the VOCAL PARTNER feature, the lead vocal layer will be removed as long as you are singing into the microphone. When you stop singing into the microphone, the lead vocal layer will automatically be added back into the music. To activate VOCAL PARTNER, press button once. To remove VOCAL PARTNER, press a second time.

NOTE: If you try to utilize this feature while a standard or non-multiplex disc is playing, it will not work as this feature is designed to work on multiplex format discs only.

PRESET/SEARCH

DISC	AV1	CANCEL
TUNER	AV2	VOCAL
		PARTNER

When operating the remote control, point the top of the remote control toward the GIG MAN PLUS’ remote sensor on the front panel and ensure that there is a clear line of sight between the remote control and GIG MAN PLUS’ void of obstacles in order to prevent signal deﬂection

27	23 feet

26.VOCAL CANCEL button - This feature is used to cancel out the lead vocal layer on a 2-channel multiplex CD+G or VCD disc. In order for this feature to work properly, the disc must be multiplex formatted. Press the VOCAL CANCEL button once to remove the lead vocal layer. Press a second time, and the lead vocal layer will be reestablished.

NOTE: If you try to utilize this feature while a standard or non-multiplex disc is playing, it will not work as this feature is designed to work with multiplex format discs only.

When to replace the batteries

The maximum operational distance between the remote control and the sensor is approximately 23 feet. If the remote only operates at shorter distances, it is time to replace the batteries.

Installing the batteries

To install the batteries, ﬁrst remove the battery compartment lid from the back of the remote control. Insert two AAA batteries, ensuring that the polarities are aligned correctly.