25’ 50’ 100’ 150’, Table a | Harbor Freight Tools 93762 guide

7.DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS

(120 VOLT)

NAMEPLATE	EXTENSION CORD
AMPERES		LENGTH
(at full load)	25’	50’	100’	150’
0 – 6	18	16	16	14
6.1 – 10	18	16	14	12
10.1 – 12	16	16	14	12
12.1 – 16	14	12	Do not use.

TABLE A

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and over- heating. Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck- ties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recom- mended. Wear protective hair cover- ing to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eye-

glasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool.

13.DON’T OVERREACH. Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and chang- ing accessories.

15.DISCONNECT TOOLS before ser- vicing; when changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNINTEN- TIONAL STARTING. Make sure switch is in off position before plug- ging in.

17.USE RECOMMENDED ACCESSO- RIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury to persons.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and per- form its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard

SKU 93762

For technical questions, please call 1-800-444-3353.

Page 4

93762 specifications

Harbor Freight Tools is renowned for offering a range of high-quality tools at affordable prices, and the 93762 model is no exception. This product is an essential addition to both professional and DIY enthusiasts' toolkits, designed to enhance efficiency and performance.

One of the main features of the Harbor Freight Tools 93762 is its powerful motor. With a robust design, this tool is engineered to deliver optimal performance for a variety of tasks, ensuring that users can tackle even the toughest jobs with ease. The high torque output allows for rapid drilling and fastening, making it ideal for both woodworking and metalworking applications.

Incorporating advanced technology, the Harbor Freight 93762 features a variable speed control that allows users to adjust the speed to suit their specific needs. This versatility is crucial when working with different materials, as it offers precision and control required for delicate tasks, alongside the power needed for more demanding jobs.

Another standout characteristic of the 93762 is its ergonomic design. The handle is contoured for comfort, providing a secure grip that minimizes user fatigue during prolonged use. This thoughtful design enhances overall handling and maneuverability, making it easier to reach tight spaces and work in challenging angles.

The tool also comes equipped with a durable construction. Made from high-quality materials, the Harbor Freight 93762 is designed to withstand the rigors of regular use while maintaining its efficiency over time. This durability ensures that users can rely on the tool for years to come, making it a worthy investment for any toolbox.

Safety features are also a priority with this model. The built-in safety lock and protective casing provide additional security, allowing users to operate the tool with peace of mind. These features help to prevent accidental starts, ensuring a safer working environment.

In summary, the Harbor Freight Tools 93762 is a versatile, powerful, and user-friendly tool that caters to a broad range of applications. Its powerful motor, variable speed control, ergonomic design, and robust construction make it an ideal choice for professionals and DIYers alike. With the right combination of technology and features, this tool stands out as a reliable option for those looking to enhance their workspace efficiency. Whether tackling home improvement projects or professional jobs, the Harbor Freight 93762 delivers performance that users can trust.