Additional features
Forced Operation
The operation will be started operation if the power button is pressed without remote controller. If you want to stop operation,
ON/OFF | ON/OFF |
button | button |
| Cooling Model |
| Heat pump Model |
|
|
|
|
| |
| Room Temp. ≥ 24°C(76°F) | 21°C(70°F) ≤ Room Temp. < 24°C(76°F) | Room Temp. < 21°C(70°F) | |
|
| |||
|
|
|
|
|
Operating mode | Cooling | Cooling | Healthy Dehumidification | Heating |
Indoor FAN Speed | High | High | High | High |
|
|
|
|
|
Setting Temperature | 22°C(72°F) | 22°C(72°F) | 23°C(74°F) | 24°C(76°F) |
|
|
|
|
|
Auto restart
In case the power comes on again after a power failure, the unit operates automatically based on the previous operating conditions.
So there is no need to activate this function by pressing any key or button.
In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later. As the compressor starts, the fan speed also resumes its previous setting mode.
In case of absence for a long time while power failure, turn off main power to avoid undersired Auto restart.
NOTICE
This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4 times.
To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator lamp(1) will blink 4 times.
ON/OFF | ON/OFF |
button | button |
Helpful information
Fan speed and cooling capacity.
The cooling/heating capacity indicated in the specification is the value when the fan speed is set to high, and the capacity will be lower at low or medium
fan speed.
High fan speed is recommended when you wish to cool/heat the room quickly.
High
Speed
High
Speed
20Wall Mounted