Heat Controller MMC24DA-1, MMC18DA-1, MMH36TA-1, MMC36TA-1 That water is drained away, Properly

Page 6

Safety Precautions

CAUTION

Installation

Always check for gas (refrigerant) leakage after installation or repair of product.

Low refrigerant levels may cause failure of product.

Install the drain hose to ensure

Keep level even when

that water is drained away

installing the product.

properly.

 

• A bad connection may cause

• To avoid vibration.

water leakage.

 

90°

Do not install the product where the noise or hot air from the outdoor unit could be offensive to neighbors or damage property.

It may be offensive to your neighbors.

Use two or more people to lift and transport the product.

Avoid personal injury.

Do not install the product where it will be exposed to sea wind (salty air) directly.

It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

Operation

Do not expose the skin directly to cool air for long periods of time.

(Don't sit in the draft.)

This could be harmful to your health.

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

There is risk of damage or loss of property.

6Wall Mounted Multi-Zone Split System Air Conditioner

Image 6
Contents Heat CONTROLLER, INC Table of Contents Service Center Safety Precautions Install the panel and the cover of control box securely For electrical work, contactBe sure the installation area does not deteriorate with age Do not modify the power cableBe cautious when unpacking and installing the product Do not handle the pipe by yourselfCostomerContact an Authorized Power supply cable Service CenterFlooded or submerged Be cautious that water does not enter the productBad connection may cause To avoid vibration Water leakage That water is drained awayProperly Use two or more people to lift and transport the productDo not block the inlet or outlet of air flow Use a soft cloth to clean. DoWhen cleaning or Not use harsh detergentsPrior to operation Remote Controller Storage and Tips For Using the Remote ControllerOperating Instructions Signal Receptor Pressed and stops when the button is pressed again Remote Control OperationSignal transmitter Nd F ButtonSet the temperature lower than the room temperature Cooling OperationTemperature and fan speed are automatically set by Auto OperationFan speed mode is shifted Healthy Dehumidification OperationSound Beep sound Temperature can be set within a rangeHeating OperationHeat pump model only 16C~30C60F~86F in 1C2F incrementsUnit will operate in high fan speed in cooling/heating mode Jet CoolOr or 2nd F Operation Setting the Time Additional featuresSleep Mode Delay Start/Pre-Set StopAir Circulation Mode Vertical Airflow Direction ControlHeat pump Model Forced OperationAuto restart Fan speed and cooling capacityMaintenance and Service Standard Type Indoor UnitReplacement of purifying filter Optional Do not overcool the room Keep blinds or curtains When the air conditioner is to be used againClean the air filter regularly Closed UniformTroubleshooting Problem Explanation SeeMemo Wall Mounted Multi-Zone Split System Air Conditioner 13-08 No A22236J
Related manuals
Manual 28 pages 40.65 Kb