Heat Controller MMH24DA-1, MMC18DA-1, MMC24DA-1, MMH36TA-1, MMC36TA-1 Do not modify the power cable

Page 4

Safety Precautions

Do not modify the power cable.

There is risk of fire or electric shock.

Do not install, remove, or re-install the unit by yourself (customer).

There is risk of fire, electric shock, explosion, or injury.

Be cautious when unpacking and installing the product.

Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.

For installation, always contact the dealer or an Authorized Service Center.

There is risk of fire, electric shock, explosion, or injury.

Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

Moisture may condense and wet or damage furniture.

Do not install the product on a defective installation stand.

It may cause injury, accident, or damage to the product.

Be sure the installation area does not deteriorate with age.

If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.

Install the indoor unit on the wall where the height from the floors more than 8ft(2.4m)

There are sharp moving parts that could cause personal injury.

Do not handle the pipe by yourself(Costomer)

High-Pressure refrigent may cause personal injury.

8ft(2.4m)

4Wall Mounted Multi-Zone Split System Air Conditioner

Image 4
Contents Heat CONTROLLER, INC Table of Contents Safety Precautions Install the panel and the cover of control box securelyService Center For electrical work, contactDo not modify the power cable Be cautious when unpacking and installing the productBe sure the installation area does not deteriorate with age Do not handle the pipe by yourselfCostomerPower supply cable Service Center Flooded or submergedContact an Authorized Be cautious that water does not enter the productThat water is drained away ProperlyBad connection may cause To avoid vibration Water leakage Use two or more people to lift and transport the productUse a soft cloth to clean. Do When cleaning orDo not block the inlet or outlet of air flow Not use harsh detergentsPrior to operation Storage and Tips For Using the Remote Controller Remote ControllerOperating Instructions Signal Receptor Remote Control Operation Signal transmitterPressed and stops when the button is pressed again Nd F ButtonSet the temperature lower than the room temperature Cooling OperationTemperature and fan speed are automatically set by Auto OperationHealthy Dehumidification Operation Fan speed mode is shiftedSound Temperature can be set within a range Heating OperationHeat pump model onlyBeep sound 16C~30C60F~86F in 1C2F incrementsJet Cool Unit will operate in high fan speed in cooling/heating modeOr or 2nd F Operation Additional features Sleep ModeSetting the Time Delay Start/Pre-Set StopAir Circulation Mode Vertical Airflow Direction ControlForced Operation Auto restartHeat pump Model Fan speed and cooling capacityMaintenance and Service Standard Type Indoor UnitReplacement of purifying filter Optional When the air conditioner is to be used again Clean the air filter regularlyDo not overcool the room Keep blinds or curtains Closed UniformTroubleshooting Problem Explanation SeeMemo Wall Mounted Multi-Zone Split System Air Conditioner 13-08 No A22236J
Related manuals
Manual 28 pages 40.65 Kb