Before You Begin
Before You Begin
EN Insert batteries into the player
1.Remove the battery door by applying thumb pressure, then lift the battery door out and off the cabinet..
Note
Refer to the power level indicator on display for battery level.
Replace with new batteries when the indicator is empty. Refer to “Display Overview” on page 11.
Connecting the Lyra Player to your Computer
1.Lift the rubber cover that is covering the USB socket on the player.
2.Insert the USB plug of the player into the USB socket on the computer tightly.
EN
Note
Refer to the Software Instruction manual for procedures in setting up USB drivers and transferring files to the player.
2.Insert a “AAA”battery with polarities corresponding to the indications on the compartment. (Refer to “Before You Begin” for important battery information.)
3.Close the door of the battery compartment.
Using Headphones
Insert phone plug into the headphones
jack ( | ) on the back of player for |
listening. |
|
Have a Blast- Just Not in Your Eardrums. Make sure you turn down the volume on the unit before you put on headphones. Increase the volume to the desired level only after headphones are in place.
5 | 6 |