Toshiba SDP63SWE owner manual Audio, Normal, Off, Bitstream, Analog 2ch

Customizing the function settings (continued)

Audio

E.A.M. DVD-V VCD CD

Normal:

Normal sound.

3D:

To obtain expansive virtual surround sound effects from just two speakers.

	Note
Settings	•	Pressing the E.A.M. button on the remote control also allows
		D.R.C. DVD-V VCD	CD
		you to achieve the same setup.
Function
	On:

Dynamic range is reduced.

Off:

Full dynamic range is maintained.

Notes

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Control may differ depending on

58 the DVD disc.

Digital Out DVD-V VCD CD

Bitstream:

Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder.

The player outputs digital audio signal in the bitstream format when you play a DVD video disc recorded in the Dolby Digital, DTS, MPEG1 or MPEG2 recording system.

Analog 2ch:

Select when connected to a TV or stereo system via the analog audio jacks.

PCM:

Select when connected to a 2 channel digital stereo amplifier.

The player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system.

SDP63SWE_E_53-76.indd 58

2009/02/02 16:21:48