Toshiba SDP63SWE owner manual Connecting to audio equipment, Make, Following, Setting

Connecting to audio equipment

You can enjoy high quality dynamic sounds by connecting the player to audio equipment.

The connecting method depends on the types of audio input, digital or audio.

Select the method according to the type of your equipment.

Connecting to an AV amplifier (via

digital audio input)

Signal flow

Caution

• When you connect the player to other equipment, be sure to

turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• Turn off the amplifier before you connect or disconnect the

player’s power cord. If you leave the amplifier power on, the

speakers may be damaged.

• The output sound of the player has a wide dynamic range.

Be sure to adjust the receiver’s volume to a moderate

Coaxial digital cable

(not supplied)

To BITSTREAM/PCM

The following audio systems are compatible:

·Dolby Digital

·DTS

·MPEG2 audio

·2 channel digital stereo

AV amplifier

	listening level. Otherwise, the speakers may be damaged by
Connections	a sudden high volume sound.
	Notes
	• Refer to the owner’s manual of the connected equipment as
	well.
	• If you place the player near a tuner or radio, the radio
	broadcast sound might be distorted. In this case, place the
	player away from the tuner and radio.

64

To digital audio input (coaxial)

Make the	Setting	Select:	Page
following	“Digital Out”	“Bitstream”	58
setting.		or
		“PCM”

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. ©1996-2007 DTS, Inc. All Rights Reserved.

SDP63SWE_E_53-76.indd 64

2009/02/02 16:21:49