Toshiba 160HD4 owner manual To lock or unlock a recorded program, To delete a recorded program

Chapter 4: Using the Symbio AVHD recorder

Managing recorded programs (continued)

Deleting, locking, and unlocking recorded programs in the Modify Program window

The Symbio AVHD recorder can record a maximum of 300 programs. (The total number will be less than 300 if you record several long programs or high-definition programs that use up the 160 GB* hard drive capacity). If you attempt to record more than 300 programs, a warning message will display and you will need to delete some programs before you can begin recording again.

If the Symbio’s hard drive becomes full during recording, it will start overwriting previously recorded programs that are not locked. You can lock recorded programs so they are not accidentally deleted or overwritten.

Note the following:

•If the hard drive becomes full, unlocked programs will be overwritten during recording.

•If the hard drive becomes full during recording and all recorded programs are locked (and subsequently cannot be overwritten), a warning message will display and recording will stop.

To lock or unlock a recorded program:

1.Press TheaterNet DEVICE to open the TheaterNet Device Selection window.

2.Press y or z to highlight the Symbio AVHD and press ENTER. The TV’s Stream Selection window opens, displaying a list of all recorded programs for the selected device (see page 14).

3.Press y or z to highlight the recording you want to modify, and then press INFO to open the Modify Program window (illustrated at right).

4.Press x or • to select either

Locked or Unlocked, and then press ENTER.

To delete a recorded program:

1.Follow steps 1–4 above, and select “Unlocked” in step 4 (if the program is locked).

2.Press z to highlight ERASE, and then press ENTER.

Note: You cannot delete a locked program. You must unlock it

before you can delete it.

_____________

Modify Program window remote control functions

ButtonFunction

TheaterNet DEVICE Opens the TheaterNet Device Selection window, from which you can select an IEEE-1394 device to view. After selecting a device, the Stream Selection window opens (see page 14). Highlight a program and press INFO to open the Modify Program window for that program.

TheaterNet CTRL	Closes the Modify Program window (if
	open) and opens the Stream Selection
	window (see page 14).
z	Highlights ERASE (if the program is
	unlocked).
y	Highlights the LOCK field.
x •	Locks/unlocks the highlighted program
	(if the LOCK field is highlighted).
ENTER	Performs the highlighted operation.
EXIT	Closes the Modify Program window.

*When referring to hard drive capacity, a gigabyte (GB) means one billion bytes. Not all clusters contained in the 160 GB hard drive are useable for recording because a portion of the drive space is allotted for directory information.

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	15
Symbio(E)06_A_06-24	15	10/19/04, 3:02 PM

(E) Symbio 160HD4