Cowon Systems CW200 user manual Connecting iAUDIO and Installing JetShell

The installation program automatically runs when the iAUDIO installation CD is inserted in the CD-ROM.

If the installation program does not start automatically, run ‘CD-ROM:\setup.exe’ or ‘CD-ROM:\JetShell\CW200\ setup.exe’. Installation automatically proceeds as the installation program runs, and after completion, JetShell is registered in ‘COWON SYSTEMS\iAUDIO (200)’ in Start - Programs.

Connecting iAUDIO to PC without battery inserted causes failure in the device.

First, insert the battery in the iAUDIO and close the cover. (See ‘Insterting Battery’)

Using the USB cable, connect the USB port jack of the iAUDIO to the USB port of the PC. After connection is established, ‘Add/Remove Hardware Wizard’ automatically runs in Windows 98/ME. After completing the USB driver installation process, install JetShell.

For detailed descriptions on connecting the USB cable, see the picture below.

Connect iAUDIO and USB port of the PC with cable.

When connection is established, ‘Add/Remove

Hardware Wizard’ runs automatically. Click ‘Next’.