![](/images/new-backgrounds/1229512/2295129x1.webp)
For Model 141.158033 recommended that you are using Grill Models
31415 Burner Grill Rotisserie: It is
add the extra 6.5" Extension Spit if you 16671, 16673 or 16235.
Screw the two Spit sections together using one Spring Washer. Tighten the sections together using two wrenches. Slide the Holding Forks onto each end of the assembled Rotisserie Spit. Adjust spacing between Skewers to accommodate your food, then tighten the Thumbscrews to keep the Food Skewers in position. Slide the Collar and Bushing onto the threaded end of the Spit. Do not tighten the Collar Thumbscrew until the Rotisserie is placed into your grill.
5
Extension Spit
11
8
Installing The Rotisserie Motor
Install the AC (altemating current) Rotisserie Motor onto the Motor Bracket as shown below. The
Motor attaches to the Bracket with the electrical cord DOWN, This installation ensures that Rotisserie Motor is properly installed onto the Motor Bracket.
Rotisserie Motor
with electrical cord DOWN
Spit must be inserted into the Motor