Philips HTL2150 user manual Troubleshooting, Buttons on the SoundBar do not work

Page 12

7 Troubleshooting

Warning

•• Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support.

Main unit

The buttons on the SoundBar do not work.

Disconnect the SoundBar from the power supply for a few minutes, then reconnect.

Sound

No sound from SoundBar speakers.

Connect the audio cable from your SoundBar to your TV or other devices.

Reset your SoundBar to its factory settings.

On the remote control, select the correct audio input.

Make sure that the SoundBar is not muted.

Distorted sound or echo.

If you play audio from the TV through the SoundBar, make sure that the TV is muted.

EN 12

Image 12
Contents Always there to help you Register your product and get support atContents Safety Help and supportRisk of electric shock or fire Use only microfiber cloth to clean the product Care for your productCare of the environment Risk of swallowing batteriesRemote control Your SoundBarAssemble your Soundbar Main unitConnectors Top connectorsRear connectors Placement ConnectConnect audio from TV and other devices Option 1 Connect audio through a digital optical cableOption 3 Connect audio through analog audio cables Adjust the volume Apply factory settingsChoose your sound MP3 playerWall mount Screw length/diameterRemote control batteries AmplifierAudio Main unitTroubleshooting SoundButtons on the SoundBar do not work No sound from SoundBar speakersCompliance TrademarksThis section contains the legal and trademark notices EC Declaration of Conformity All rights reserved HTL215012UMV3.0