Heat Controller, Inc. | INSTALLATION INSTRUCTIONS | SMA/SMH 18/24 |
2. Line Set and Condensate Drain Line
1.Condenstate Drain
A.Run the drain hose sloping downward. DO NOT install the drain hose as illustrated below.
B.When extending the drain hose, insulate appropriately.
2. Line Set
Left rear piping
Right rear piping
A.
B. |
C.
•Connect the indoor unit first, then the outdoor unit. Bend and arrange the piping carefully.
•Do not allow the piping to loosen from the indoor unit during installation.
•Be sure not to let the drain hose slack.
•Insulate both pipes.
•Do not allow the power cable and control cable to be crossed.
4