Features, Control Locations | Heat Controller BDE-123-A, BDE-103-A

1.4 FEATURES

•Designed for cooling only.

•Powerful and quiet cooling.

•Top-down chassis for the simple installation and service.

•Side air-intake, side cooled-air discharge.

•Built in adjustable THERMOSTAT.

•Washable one-touch filter.

•Compact size.

Operation				Off	- Turns air conditioner off.
	Off			Off	- Turns air conditioner off.
	Off			Med Fan	- Med speed fan operation without cooling.
Med			High	Med Fan	- Med speed fan operation without cooling.
Med			High	Low Fan	- Low speed fan operation without cooling.
Fan			Cool	Low Fan	- Low speed fan operation without cooling.
				High Cool - Cooling with high speed fan operation.
Low			Med	Med Cool	- Cooling with med speed fan operation.
Low			Med	Low Cool	- Cooling with low speed fan operation.
Fan	Low Cool		Cool	Low Cool	- Cooling with low speed fan operation.
	Low Cool

Thermostat
		C
		o
	5	ol
	5		r
4		6	e	This automatically controls the temperature of the indoor air.
4		6

37 Turn the knob so that arrow points to the larger marks for

2	8	greater cooling. Point the arrow to the smaller marks for more moderate cooling.
		(i.e. the higher number, the greater cooling)

The ventilation lever is located in the right of the air discharge.

The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions.

When fresh air is necessary in the room, set the ventilation lever to the OPEN position.

The damper is opened and room air is exhausted outside.

PULL OPEN / PUSH CLOSE

On : Both the fan and the compressor turn on and turn off together while operation knob is set to the Cool position.

You can get the more economical operation.

Off : The fan runs constantly while operation knob is set to the Cool position.

You can access the Energy Saver switch when you open the inlet grille.

—4—