Air purging by refrigerant Procedure | Heat Controller A-VMH27TC-1

Heat Controller, Inc.	VMH Series	Service Manual

the pressure can’t achieve -0.1Mpa after pumping 50 minutes, please check if there are some leakage points. Once the meter indicates -0.1mpa, fully close the handle Lo valve of the manifold valve and stop the operation of the vacuum pump. Confirm that the gauge needle does not move (approximately 5 minutes after turning off the vacuum pump).

7) Turn the flare nut of the 3-way valves about 45° counterclockwise for 6 or 7seconds after the gas

comes out, then tighten the flare nut again. Make sure the pressure display in the pressure indicator is a little higher than the atmospheric pressure. Then remove the charge hose from the 3 way valve.

8)Fully open the 2 way valve and 3 way valve and securely tighten the cap of the 3 way valve.

2. Air purging by refrigerant

Procedure:

1). Confirm that both the 2-way and 3-way valves are set to the closed position.

2). Connect the charge set and a charging cylinder to the service port of the 3-way valve.

3). Air purge by open the valves on the charging cylinder and the charge set. Purge the air by loosening

the flare nut on the 2-way valve approximately 45° for 3 seconds then closing it for 1 minute; repeat 3

times. After purging the air, use a torque wrench to tighten the flare nut on the 2-way valve.

4). Check for gas leakage by checking the flare connections using the soap water method.

5). Discharge the refrigerant by closing the valve on the charging cylinder and discharging the refrigerant

by loosening the flare nut on the 2-way valve approximately 45° until the gauge indicates 0.3 to 0.5 Mpa.

6). Disconnect the charge set and the charging cylinder, and set the 2-way and 3-way valves to the open

position.

Be sure to use a hexagonal wrench to operate the valve stems.

A-VMH18DC-1, A-VMH36QC-1, A-VMH27TC-1 specifications

The Heat Controller A-VMH series, consisting of models A-VMH27TC-1, A-VMH36QC-1, and A-VMH18DC-1, represents a sophisticated range of advanced heating and cooling systems designed for residential and commercial applications. These units are engineered to provide efficient climate control, ensuring optimal comfort throughout the year.

One of the standout features of the A-VMH series is its energy efficiency. With advanced inverter technology, these units adjust their power consumption based on the heating or cooling demand, ensuring minimal energy wastage. This not only contributes to lower energy bills but also reduces the carbon footprint, making these systems an environmentally friendly choice.

Each model in the A-VMH series comes equipped with a multi-stage filtration system designed to improve indoor air quality. The filters capture dust, allergens, and other particulate matter, ensuring that the air circulated through the living spaces is clean and fresh. This is particularly beneficial for households with allergy sufferers or respiratory issues.

The A-VMH27TC-1 model stands out for its compact design, making it ideal for smaller spaces without compromising on performance. It offers a cooling capacity of 27,000 BTU and is perfect for apartments or cozy living areas. The A-VMH36QC-1, on the other hand, provides a robust 36,000 BTU cooling capacity, making it suitable for larger rooms or commercial spaces. Its advanced heat pump technology allows for efficient heating even in colder climates. Lastly, the A-VMH18DC-1 model balances functionality and space-saving design, providing 18,000 BTUs for medium-sized areas.

All models are equipped with smart connectivity options, allowing users to control the temperature settings, adjust modes, and monitor energy consumption through mobile apps or smart home systems. This modern convenience provides users with the flexibility to maintain comfort according to their schedules and preferences.

Durability is also a hallmark of the A-VMH series. Each unit is built with high-quality materials and components, ensuring longevity and reliable performance. Moreover, the whisper-quiet operation of these units enhances the overall comfort, allowing users to enjoy their spaces without disruptive noise.

In summary, the Heat Controller A-VMH27TC-1, A-VMH36QC-1, and A-VMH18DC-1 are ideal choices for anyone seeking efficient, reliable, and smart climate control solutions. With their combination of energy efficiency, advanced filtration, smart capabilities, and robust design, these units meet the diverse needs of modern living and ensure lasting comfort in any environment.