Philips AJ3136 warranty Using the Alarm, Tip, 24HR Alarm Reset, Repeat Alarm, Sleep

Page 11

USING THE ALARM

General (see 2)

If you wish to use the alarm, first set the alarm time before selecting your choice of alarm mode. By rotating the set in 4 different position, you can choose Radio

(FM) / Buzzer / Submarine / Frog to wake you up. As you rotate the set, AJ3136 interacts in the following way. You will :

hear a special whirring sound effect

see the backlight blink briefly.

The hour and minute display will also adjust to match the new rotated position.

TIP :

If you wish to deactivate or activate the whirring sound, press and hold on the HOUR + and RADIO ON / OFF buttons simultaneously.

When the batteries on AJ3136 are low, the battery low icon blinks. No blacklight and sound effects are possible.

Setting the alarm

1.Press ALARM ON / OFF once to switch on the alarm.

lights up.

2.Rotate the set with the symbol of the alarm mode, which you wish to be woke up, facing on the top.

When reach alarm setting time, Radio, Buzzer, Submarine or Frog will switch on for about 30 minutes and the alarm indicator flashes.

For Buzzer option only, your gentle wake alarm increases its beep tone frequency within seconds.

Switching off the alarm

24HR ALARM RESET

If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:

Press ALARM RESET / SLEEP.

You will hear a sound “Ding Dong” confirming 24 hour reset activation.

REPEAT ALARM

This will repeat your alarm call at 5 minute intervals.

During the alarm call, press REPEAT ALARM•BRIGHTNESS CONTROL

The alarm indicator flashes during repeat alarm.

Repeat if desired.

CANCELING THE ALARM COMPLETELY

• During alarm activated or repeat alarm mode, press ALARM ON / OFF once. Alarm will be switched off completely.

The alarm indicator disappears.

SLEEP

About Sleep

This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period of time. There are four sleep time options.

Setting and switching off sleep

1Press ALARM RESET / SLEEP to switch on the radio

2Within 1 second, press ALARM RESET / SLEEP again once or more to select your sleep time.

The sleep time options:

SL : 30, SL : 20, SL : 10 and OFF.

The Sleep indicator lights up.

3To cancel sleep, press either:

ALARM RESET / SLEEP once or more until

disappears from the display.

REPEAT ALARM•BRIGHTNESS CONTROL

Image 11
Contents Clock Radio Philips Consumer Electronics North America Page Alarm Alarm Alarm Safety Important Safety Instructions Before Requesting Exchange WHO is COVERED? What is COVERED?What is EXCLUDED? Where is Exchange AVAILABLE?Philips, P.O. Box 520890, Miami, FL 33152, USA, 402 Exchanging a Product in CanadaRemember SELF-POWERED BACK-UP Alarm Reset / Sleep@ Repeat Alarmbrightness Control Power SupplyGeneral Features Battery LOW ModeSetting the Clock and Alarm Times Canceling the Alarm Completely Using the Alarm24HR Alarm Reset Repeat AlarmEnviromental Information MaintenanceTroubleshooting