FM wire antenna
Preparations
English
AC power adaptor
Rear connections
The type plate is located at the rear of the system.
APower
●Before connecting the AC power adaptor to the wall outlet, ensure that all other connections have been made.
WARNING!
–For optimal performance, use only the original AC power adaptor.
–Never make or change connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
B Antenna Connection
Connect the supplied FM antenna to the FM terminal. Extend and position the FM antenna for optimal reception.
Note:
–Position the FM antenna away from the speaker wires to avoid electrical interference.
C Speaker connections
Use the supplied speakers only. Using other speakers can damage the set or the sound quality will be negatively affected.
●Connect the cable of the left speaker to L (red and black) and the cable of the right speaker to R (red and black) as follows:
Press the clip of the red terminal and fully insert the stripped portion of the coloured (or marked) speaker cable into the socket, then release the clip.
Press the clip of the black terminal and fully insert the stripped portion of the black (or unmarked) speaker cable into the socket, then release the clip.
11