USB playback functions, Programming track numbers

USB playback functions

You can select and change the various play modes before or during playback.The REPEAT modes can also be combined with PROGRAM.

1To select your play mode, press REPEAT/ SHUFF before or during playback until the display shows the desired function.

➜SHUFF appears if shuffle playback is activated and disappears if deactivated.

➜If rEP onE appears the current track will play repeatedly.

➜If rEP ALL appears all tracks will be played repeatedly.

➜If both rEP and ALB appears the current album will play repeatedly.

2To return to normal playback, press the REPEAT/SHUFF until oFF displayed.

●You can also press 9 to stop playback and cancel your play mode.

Note:

– The Repeat and Shuffle functions cannot be combined.

Program in the STOP position to select and store up to 20 tracks in the memory.

1Press PROG/CLOCK on the remote control to enter the programming mode.

➜ Pr 01 appears and PROG flashes.

2Press S/T to select your desired track

number.

●For tracks in a different album, press ALBUM/ PRESET 3 4 to select a desired album

number.

3Press PROG/CLOCK to confirm the track number to be stored.

4Repeat steps 2-3 to select and store all desired tracks.

➜ FULL appears if you attempt to program more than 20 tracks.

5To start playback of your program, press ÉÅ.

You can erase the program by:

●pressing 9 once in the STOP mode;

●pressing 9 twice during playback; ➜ PROG disappears.